







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Winchester, NV: What the Job Actually Involves
New cabinets and countertops in Winchester typically run $14,000 – $45,000 when you’re replacing both, and a straight swap with no layout changes lands closer to $4,000 – $13,000 for cabinets alone or $2,000 – $6,500 for counters. Most of our Winchester cabinet and countertop jobs are finished in two to four weeks once materials arrive, and lead time on semi-custom cabinets is usually the long pole. Call (844) 797-4406 for a free on-site estimate and a written line-item quote before you commit to anything.
How We Run a Cabinet and Countertop Job, Stage by Stage

This work has a sequence, and the sequence is why a kitchen can sit torn up for a month when a crew improvises. Here’s the order we hold to on Winchester jobs.
Stage 1: Measure and lock the layout (day 1, about 2 hours)
We laser-measure walls, check for out-of-square corners, note where the shutoffs and outlets sit, and confirm appliance cutouts. This is where you decide box color, door style, and whether the sink stays put. Anything you change after this point costs money, so we slow down here on purpose.
Stage 2: Order and confirm (days 2 – 5, then a wait)
You approve the line-item quote, we place the cabinet order, and you pick the countertop slab and edge profile. Stock cabinets arrive in roughly a week; semi-custom runs three to six weeks. You’ll also choose the backsplash tile now if you’re doing one, even though it installs later, so the schedule doesn’t stall.
Stage 3: Demo and prep (days 1 – 2 of active work)
Old counters and boxes come out, we cap or move any plumbing and electrical that has to shift, and the walls get patched, primed, and leveled. Cabinet installation is only as good as the wall behind it. If a wall is out of plumb in a mid-century unit, we shim and scribe rather than force the box and crack the finish later.
Stage 4: Set cabinets and template (2 – 3 days)
Base and wall cabinets go in, level and shimmed, doors and drawers adjusted, crown and filler applied. Then the countertop fabricator comes out to template the actual installed boxes, not the drawing. Template to install is typically five to ten business days for quartz or granite, faster for butcher block or laminate.
Stage 5: Counter install, plumbing hookup, punch list (1 – 2 days)
Slabs set, sink and faucet connected, backsplash set and grouted, appliance panels and toe kicks finished. We walk the job with you, list anything that needs a tweak, and close it out. The whole thing is covered by our 730-Day Done Right Promise, so if a door sags or a seam lifts in year one, we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Most of the decision-making on this job comes down to four choices. Here’s how they shake out honestly.
- Stock vs. semi-custom boxes: Stock is cheaper and faster (about a week to arrive) but limited in size, so you fill gaps with filler strips. Semi-custom runs three to six weeks and costs noticeably more, but it fits odd dimensions cleanly and gives you far more door styles. In denser Winchester units with tight walls, semi-custom often saves you from ugly filler strips.
- Quartz vs. granite vs. laminate: Quartz is the current default – non-porous, no sealing, and it takes abuse. Granite is tougher to damage but needs periodic sealing. Laminate costs a fraction of both and has gotten good, but it can’t take a hot pan and it shows seam lines. For a rental or a flip in 89109, laminate is a defensible call; for a home you’ll keep, quartz is worth the step up.
- Door material and finish: Painted MDF looks crisp and costs less, but chips at corners get noticed. Solid wood and thermofoil handle wear differently – thermofoil shrugs off moisture but can peel at edges in a hot kitchen. Where a kitchen gets direct afternoon sun, we steer people toward finishes that don’t fade.
- Hardware and fixtures: Soft-close hinges and full-extension drawers are standard on most lines now; undermount sinks and a quality faucet are where people notice daily. A Grohe or similar-grade faucet runs more upfront and usually outlasts the bargain unit it replaces.
What Cabinets & Countertops Cost in Winchester, NV

The realistic range for a full cabinet and countertop replacement here is $14,000 – $45,000. Line items break down roughly like this:
| Scope | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash | $800 – $2,500 |
| Kitchen island | $3,000 – $10,000 |
| Full kitchen remodel (cabinets, counters, layout) | $14,000 – $45,000 |
Five things push a job toward the high end: square footage and cabinet count; whether walls are plumb or need repair; moving plumbing, gas, or electrical; material grade (semi-custom quartz vs. stock laminate is a wide gap); and permit scope if walls or utilities move. A written estimate from us lists cabinets, counters, labor, demo, disposal, and finish work as separate lines. It typically does not include appliance purchase, structural changes, or any surprise discovered behind a wall – and we tell you that upfront so there are no change-order shocks later.
See the difference
Before
After
Before
After
Before
AfterWhat Winchester Homes Specifically Do to This Job
Winchester is unincorporated Clark County, wedged between Las Vegas and the Strip, and that changes how this job runs. There’s no Winchester city hall issuing permits – Clark County handles plan review and inspection, and that matters because a straight cabinet and counter swap is generally permit-exempt while anything touching plumbing, gas, or walls is not. Many of the kitchens we work on sit in older low-rise apartments and mid-century commercial-adjacent buildings along the resort corridor, where walls are rarely square and cabinets were built in place decades ago. We see the same failures repeatedly: sagging particleboard boxes swollen from a slow leak, laminate counters delaminating at the sink edge, and cabinets screwed to drywall with nothing behind them. Because these units are often on swing or night schedules to dodge Strip-adjacent daytime traffic and 105°F-plus summer heat, we plan deliveries and countertop installs around access windows rather than assuming a curb drop at 9 a.m. is easy. If your project widens into a layout change, it’s part of a full Kitchen Remodeling in Winchester, and we scope it that way from the start.
Serving Winchester, NV – Our Local Coverage Area
We serve Winchester and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Winchester

Two to four weeks of active work once materials are on site, with the cabinet lead time being the wild card. Stock cabinets add about a week; semi-custom adds three to six. Call (844) 797-4406 for a schedule estimate built around your delivery date.
Usually not, if you’re replacing like-for-like in the same location. Because Winchester is unincorporated, permit review runs through Clark County rather than a city building department, and moving plumbing, gas, or a wall generally pulls the job into the permit process. We confirm the requirement for your specific scope before work starts and pull the permit if one is needed.
Yes, and it’s the most common version of the job. Replacing boxes and counters in the same footprint keeps cost and disruption down and skips the permit question in most cases. If the sink has to shift or an island gets added, that’s when scope, cost, and timeline step up.
Expect $14,000 – $45,000 for cabinets and countertops together, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500 on their own. Material grade and whether utilities move are the biggest swing factors. Call (844) 797-4406 for an exact quote – estimates are free and line-itemed.
Our 730-Day Done Right Promise covers workmanship for two years from completion – if something isn’t right, we make it right. Manufacturer warranties on cabinet and slab products come separately. Call (844) 797-4406 with any warranty question and a live person answers, day or night.
Get a Free Estimate on Cabinets & Countertops in Winchester
Start with a free on-site estimate. We measure the actual space, talk through stock versus semi-custom and quartz versus laminate, and hand you a written line-item quote – the number you see is the number you pay. Our technicians bring up to 12 years of experience to every job, and the work is backed by the 730-Day Done Right Promise. Call (844) 797-4406 to schedule. Homeowners often pair this with a Garage Conversion ADU in Winchester or a New Detached ADU in Winchester when they’re reworking a whole property. For wider scope, see our Kitchen Remodeling service, and find the full set of services we offer across Winchester.
Written by the team at Groundwork Construction Co.












