







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Walk-In Shower Installation Cost in Enterprise?
Walk-in shower installation in Enterprise typically costs $4,500 to $12,000 for a full project, with most homeowners landing near $7,200 for a standard curbless tile shower in a hall bath. A straight swap into an existing shower footprint runs $3,000 to $8,500, while a full bathroom remodel that folds in the shower runs $9,000 to $28,000. Those numbers include demo, waterproofing, tile, glass, drain work and finish, with the spread driven mostly by shower size, tile choice and whether the drain has to move.
We get asked for a walk-in shower number almost every week in Enterprise, so we keep our ranges in writing. Upfront pricing means the number you see is the number you pay, and every project is backed by our 730-Day Done Right Promise. Call (844) 797-4406 and a live person answers, day or night.

Key Takeaways
- Full walk-in shower installation in Enterprise runs $4,500 to $12,000, materials and labor included.
- Curbless (zero-threshold) showers cost more than curbed showers because the floor has to be recessed and re-sloped.
- Tile is the biggest swing item. Large-format porcelain costs less to lay than small mosaic, which is slow, fussy work.
- Waterproofing is not optional in Clark County. A failed shower pan means tearing out the floor, not patching it.
- Every project comes with our 730-Day Done Right Promise, 0% financing for 18 months and $1,000 off projects over $10,000.
Walk-In Shower Installation Cost Breakdown (2026)
Here’s how a full walk-in shower project in Enterprise breaks down in 2026. These ranges cover labor and materials for a standard 60-inch by 36-inch shower. Bigger, curbed or curbless builds shift the line items below.
| Line Item | Typical Cost Range |
|---|---|
| Demo and haul-off of old shower or tub | $350 – $900 |
| Plumbing rough-in / drain relocation | $500 – $1,800 |
| Waterproofing membrane and shower pan | $600 – $1,600 |
| Wall tile (standard porcelain/ceramic) | $900 – $3,000 |
| Floor tile and curb | $300 – $900 |
| Shower valve, trim and fixture | $300 – $1,200 |
| Glass door, panel and hardware | $800 – $2,500 |
| Niche, bench, linear drain, optional extras | $400 – $1,400 |
| Permit and inspection fees | $150 – $600 |
Add those up and a standard walk-in shower sits right around $4,500 to $12,000 in Enterprise. The three line items we watch most closely are waterproofing, tile selection and drain relocation. Those are where projects either stay on budget or creep. A shower that looks simple on paper can double in cost if the drain has to move across the slab or if the customer picks hand-set marble.
We bring background-checked, uniformed technicians to every job, and we coordinate our trusted brand partners for tile, fixtures and glass. If you’re weighing a wider bathroom renovation, our home page lays out the full scope of what we handle from foundation to finish line.

What Affects Walk-In Shower Installation Pricing in Enterprise
Enterprise is not a high-cost tile market, but local conditions push pricing in specific directions. Here’s what moves the number.
- Shower size and shape. A standard 60-inch alcove runs low. A 5-foot by 5-foot walk-in or a corner shower with two glass panels runs toward the top of the $4,500 to $12,000 range because every square foot of tile, waterproofing and glass costs labor.
- Curbless versus curbed. Curbless showers need the floor recessed, the slab or subfloor re-sloped and a linear drain set flush. That framing and plumbing work adds $800 to $2,000 in Enterprise, but it’s the upgrade most homeowners over 55 ask for first.
- Tile choice. Large-format porcelain costs less to lay and cleans up easier than small hexagon or penny mosaic. Small tile means slower setting and more grout lines. A $900 material difference can turn into a $2,500 labor difference.
- Drain location. If the new drain lands where the old one sat, you save. If it has to move, the slab has to be cut, re-plumbed and re-poured. In Enterprise’s slab-on-grade homes, that’s a real line item, not a guess.
- Glass and hardware. Framed panels cost less than frameless. A custom-cut frameless door with premium hinges can run $2,500 on its own.
- Waterproofing and code. Clark County requires a shower pan that passes inspection. We use a full membrane system and a tested pan before tile ever goes down. Skipping it saves a few hundred dollars today and costs several thousand later.
What Does a Walk-In Shower Cost in Enterprise Compared to a Full Bathroom Remodel?
A walk-in shower installation in Enterprise runs $4,500 to $12,000 as a standalone project, while a full bathroom remodel in the same city runs $9,000 to $28,000. If your bathroom is otherwise sound (vanity, floor, toilet, lighting all fine), the shower-only project is the better spend. If you’re already tearing into the walls, folding in the shower keeps you from doing demo twice.
A small bathroom remodel that includes the shower sits at $5,000 to $12,000, and a tub-to-shower conversion (which is a different scope with more plumbing change) runs $3,500 to $10,000. For a straight replacement into an existing shower footprint, $3,000 to $8,500. If you’re adding a vanity at the same time, that’s another $800 to $3,000.
How to Save on Walk-In Shower Installation in Enterprise
These are the moves that actually lower the number without cutting a corner that comes back later.
- Keep the drain where it is. Reusing the existing drain location saves $500 to $1,800 in plumbing and slab work. If you can design your new shower around it, do.
- Pick large-format tile. Porcelain slabs and large-format tile cost more per square foot than small mosaic but far less in labor. The tradeoff math favors larger tile almost every time.
- Bundle with other bathroom work. If the vanity or floor is also due, doing it all in one project spreads demo, disposal and inspection costs across more work. Our Enterprise service area page covers everything from a single fixture swap to a full gut remodel.
- Take the standing offers. We run $1,000 off projects over $10,000, 0% financing for 18 months, and a free project estimate and design consult. Those are real dollars off the top and a real two hours of design time back in your week.
- Skip the frameless door if the budget is tight. A framed sliding panel runs $800 to $1,200 versus $2,500 for a custom frameless door. Same shower, different look.
- Get a written, itemized estimate. Vague bids are where hidden costs live. We put every line item on paper before a single tile is set.
If you want to see what your specific bathroom pencils out to, call (844) 797-4406. Estimates are free and a live person picks up.
Why Waterproofing Is the Line Item You Can’t Skip
This is the part of the project homeowners regret most when it’s done wrong, and we see it every week in Enterprise. A shower pan that fails means the tile and cement board come back out, the framing gets inspected for rot, and the whole shower is rebuilt from the membrane up. That’s a $4,000 to $7,000 do-over on a job that should have been right the first time.
We use a full waterproofing system: bonded membrane on the walls, a tested shower pan membrane, and a flood test before tile. Inspectors in Clark County look for it. Our technicians have up to 12 years of experience, and every project carries our 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years. That’s one of the longest workmanship guarantees in the residential construction space, and it only makes sense on a shower built to last.
We build with materials from a curated list of top-tier brand partners – the same discipline we bring to home construction across every trade. Bathroom work is no exception. From tile to fixture to glass, the materials are chosen for how long they last, not just what’s on the shelf.
Can You Install a Walk-In Shower Over a Slab in Enterprise?
Yes. Most Enterprise homes are slab-on-grade, and we handle both curbed and curbless installs on slab. Curbless showers require cutting into the slab to recess the shower floor and slope the pan toward the drain, which adds $800 to $2,000 and requires proper permits and inspection. A curbed shower sits on top of the slab and is the lower-cost route. Either way, the pan is tested before tile.
Spring and summer heat in Enterprise pushes plumbing work indoors, where it’s fine. What we watch is the slab. If the home was built in a way that makes drainage tricky, we find out at estimate, not mid-project. That’s part of why we want eyes on the bathroom before we quote.
Walk-In Shower Installation vs. Shower Replacement vs. Tub-to-Shower Conversion
These three projects get confused, and they price differently.
- Walk-in shower installation: $4,500 to $12,000. Full new shower in a dedicated space, including waterproofing, plumbing, tile and glass.
- Shower replacement: $3,000 to $8,500. Straight swap into an existing shower footprint. No drain relocation, no layout change.
- Tub-to-shower conversion: $3,500 to $10,000. Removing a tub and building a shower in its place, which usually includes moving the drain and reworking the rough-in.
If you’re unsure which one your project is, describe it and we’ll tell you straight. No upsell to the bigger scope if the smaller one solves the problem.
FAQs – Walk-In Shower Installation Cost
How much does a walk-in shower cost in Enterprise?
A full walk-in shower installation in Enterprise typically costs $4,500 to $12,000, with most jobs landing near $7,200. That range covers demo, waterproofing, plumbing, tile, fixtures and glass. Call (844) 797-4406 for a free estimate on your bathroom.
Is a walk-in shower cheaper than a bathtub?
A walk-in shower typically costs less to install than a tub-and-surround project in Enterprise, with showers from $4,500 to $12,000 and tub-to-shower conversions from $3,500 to $10,000. The tub itself is the smaller line item; the difference is usually the surround tile and plumbing. Call for a side-by-side quote.
How long does a walk-in shower installation take?
Most walk-in shower installs in Enterprise take 5 to 10 working days from demo to final walkthrough. Curbless showers with drain relocation and custom glass run longer, sometimes 3 weeks, because glass is measured after tile and fabricated to fit. Curbside estimates are free.
Do I need a permit to install a walk-in shower in Enterprise?
Yes, in most cases. A shower install that changes plumbing or moves a drain requires a plumbing permit and inspection in Clark County, and permit fees typically run $150 to $600. We pull the permit for you so the pan and rough-in pass inspection before tile. Call (844) 797-4406 with your address and we’ll confirm what your project needs.
Is it cheaper to repair or replace a walk-in shower?
Repair is cheaper when the problem is surface-level: re-grout, re-caulk, or replacing a shower valve runs a few hundred dollars. Replacement, at $3,000 to $8,500, is the smarter call when a shower pan has failed or there’s water damage behind the tile, because a patch will leak again. We’ll tell you which one your shower actually needs during the free estimate.
Get a Walk-In Shower Number in Writing
Walk-in showers aren’t a guess. They’re a scope, and a scope gets a number. Call (844) 797-4406 for a free estimate and design consult. A live person answers around the clock, no voicemail black holes. You’ll get upfront pricing, background-checked uniformed technicians, and the 730-Day Done Right Promise on every job. Ask about $1,000 off projects over $10,000 and 0% financing for 18 months. That’s how we’ve earned trust with Enterprise homeowners since the work has to hold up in writing.
Pricing reflects the Enterprise market as of 2026. Groundwork Construction Co. of Enterprise offers free estimates – call (844) 797-4406.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












