







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBathroom Vanity Installation Cost in Enterprise, NV: What You’ll Actually Pay
Bathroom vanity installation in Enterprise runs $800 to $3,000, and the number is driven almost entirely by one thing: whether your new vanity fits the rough-in plumbing your house was built around. A same-footprint drop-in swap sits near the bottom of that range. A larger double-sink unit with a relocated drain, patched drywall, fresh supply valves and a fabricated stone top climbs toward the top. Call (844) 797-4406 and we’ll give you an upfront price before anything gets opened up. No-hassle upfront pricing, no surprises.
Key Takeaways
- Vanity installation in Enterprise: $800-$3,000 installed, including top and standard plumbing reconnection.
- The single biggest cost driver is rough-in compatibility, not the vanity you pick.
- Corroded shut-off valves from Las Vegas hard water get replaced as standard on every install.
- Cambria tops are fabricated to exact field measurements, so we measure twice and fabricate once.
- Drain relocation cost is quoted before the wall opens, not after.

Why a Vanity Swap in Enterprise Tract Homes Takes Longer Than the Videos Show
Here’s the problem nobody warns you about at the showroom. If your house sits in Mountain’s Edge, Southern Highlands or any of the master-planned subdivisions that fill Enterprise’s southwest corridor, it was built in the 1990s or later with a builder-grade vanity and rough-in plumbing placed for that exact cabinet. The drain stub-out is where it is. The supply lines are where they are. The engineered wall layout behind the drywall is where it is.
Buy a 48″ double-sink vanity to replace a 36″ single and you’ve moved the drain basin out of alignment. That’s not a one-hour job anymore. It’s a drain relocation, a drywall patch, usually new supply valves, and a countertop re-fabricated to fit. National cost guides that quote “labor only” for a vanity install don’t account for this because they weren’t written walking through a Nevada tract house.
That gap is why identical-looking vanities can cost you $450 in one Enterprise bathroom and $2,800 in the one next door. Same cabinet. Different rough-in.
What Drives the Price: A Line-Item Look
Here’s how the installation work breaks down before you add the vanity itself. These are the numbers we work from in Enterprise, and they hold across the valley:
| Line item | Typical range |
|---|---|
| Drop-in swap, same footprint, same drain location | $450-$800 |
| Full vanity installation with new top and standard reconnection | $800-$3,000 |
| Supply valve replacement (per valve) | $45-$120 |
| Drain relocation, including drywall patch | $350-$900 |
| Cambria top fabricated to field measurement | $600-$1,600 |
| Full bathroom remodel (when the vanity is part of a larger job) | $9,000-$28,000 |
If the vanity is part of a wider renovation, the whole project falls into our Bathroom Remodeling range, which runs $9,000-$28,000 in Enterprise. Smaller bathrooms land between $5,000 and $12,000, and a Bathroom Remodeling in Enterprise project that includes a walk-in shower typically runs $4,500-$12,000 on the shower alone.

The 2005 Valve Problem: A Detail Most Contractors Skip
Enterprise homes built before about 2005 almost always have original angle stop valves under the sink. Las Vegas hard water is brutal on those. The mineral load in the supply eats chrome and brass from the inside, and a valve that’s sat closed for twenty years tends to seize. Twisting it to shut off water for the vanity install is the exact moment a stem snaps and floods the cabinet.
We replace the stop valves as standard on every vanity install. Not as an upsell. Not as a “we noticed while we were in there” line item at the end. It’s part of the quote. Leaving a twenty-year-old valve behind means the new vanity comes with a plumbing failure six months out, and you’ll remember the contractor who left it there.
Background-checked, uniformed technicians make the connection on your supply lines. The person plumbing your vanity is a verified professional, not a finish carpenter pushing past their license to save a call.
Cambria Tops: Why Field Measurement Matters
If you’re going with a Cambria vanity top, the fabrication happens to exact measurements off your specific cabinet and wall. Not cut-to-fit on site. Not trimmed to a stock template. That means if the wall behind the vanity isn’t square (and in tract construction it rarely is), the measurement has to account for it before the slab gets cut.
We measure twice and fabricate once. The material warranty stays intact because the installation follows manufacturer spec. Skip that step and you’re buying an expensive stone that doesn’t fit a foot out of the gate, with no recourse.
How Enterprise’s Housing Stock Shapes the Job
Almost every house in Enterprise is 1990s-or-newer stucco-and-tile construction. There’s very little historic renovation work here compared to older parts of Las Vegas, which actually helps: you rarely find the plumbing nightmares that come with 1960s cast iron. What you do find is newer but cookie-cutter rough-in placement, engineered-fill construction on the sloped lots near the Sloan and Blue Diamond foothills, and lots of homes with the same original vanity configuration the builder installed.
Summer heat above 105°F also means we schedule moisture-sensitive work carefully, but for a vanity install that’s mostly a matter of not leaving supply lines pressurized in a shut-off bathroom during a July afternoon. Small thing. Prevents water damage.
Common Scenarios We See in Enterprise
The single-to-double upgrade. You bought a 60″ double vanity to replace the original 48″ single. Every house in your subdivision had that 48″. The drain is going to move. This is the $2,500+ scenario, and it’s worth every dollar once it’s done right.
The one-bathroom refresh. Same footprint, same drain, new top and new fixture. This runs closer to the $800-$1,200 end and gets done in a single visit.
The “while we’re at it” bathroom. A vanity install that becomes a full bath refresh because the tile behind the old vanity had failed and the subfloor showed water staining. This is where the $9,000-$28,000 range kicks in and where having a single contractor for the whole job, from foundation to finish line, saves you from juggling three subs.
What’s Included When We Quote a Vanity Install
We put the whole thing in the number you approve:
- Removal and disposal of the old vanity and top
- Supply valve replacement (standard, no separate line item)
- Drain reconnection, or relocation if the new vanity demands it
- Drywall patch and paint-ready finish where the drain moved
- Countertop install, whether stock or fabricated stone
- Fixture and faucet connection, tested and dry
- Haul-away of packaging and old materials
No-hassle upfront pricing means the drain relocation cost, if your job needs it, is in the quote you approve. Not a mid-job surprise when the wall is already open and your bathroom is unusable. And the whole thing is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Built to last, backed in writing.
Our technicians have up to 12 years of experience on jobs like this. Calls are answered by a live person 24 hours a day, 7 days a week, so you’re not waiting until Monday to get a question answered.
FAQs
Vanity installation in Enterprise runs $800 to $3,000 installed, including the top and standard plumbing reconnection. A same-footprint drop-in swap can land closer to $450, while a larger vanity with drain relocation, drywall patch and a fabricated stone top tips toward $2,800-$3,000. Call (844) 797-4406 for an exact quote. Estimates are free.
Replacement is almost always the better spend once a vanity is 15+ years old. Repair costs $150-$400 for a drawer, door or valve fix, but an original builder-grade cabinet from the 1990s is past its useful life and a repair just delays the replacement. We’ll tell you honestly which one makes sense when we look at it.
Yes, for same-footprint swaps with no drain relocation. A straight drop-in replacement is a single-visit job. If the drain has to move or a stone top needs fabrication, expect a second visit for the top install after measurement. Calling ahead at (844) 797-4406 lets us confirm which scenario you’re in before we arrive.
Yes, and it’s the most common scenario in Enterprise tract homes. Your original vanity was built for a specific drain position, so a larger or double-sink replacement almost always requires relocation. That cost is quoted upfront before the wall opens, not tacked on mid-job.
Get a Vanity Quote for Your Enterprise Bathroom
Before you buy the vanity, get the number. We’ll measure your rough-in, tell you whether the drain has to move, and hand you an upfront price that covers the whole job. Call (844) 797-4406 for a free estimate and design consult. Live person, 24/7. Plus 0% financing for 18 months and $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co. of Enterprise, serving Enterprise, NV.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












