







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWrought Iron Fence Cost in Enterprise, NV: What You’ll Actually Pay and Why the Coating Spec Matters More Than the Price
Wrought iron and steel tubular fencing in Enterprise runs $3,500 to $9,000 installed for a typical residential lot, which works out to roughly $45-$70 per linear foot for prefabricated panels and $70-$120 per linear foot for custom fabricated iron with ornamental detailing. That price is supposed to buy a lifetime fence. It only does if the steel is primed and coated for a desert that eats exposed metal. Call Groundwork Construction Co. of Enterprise at (844) 797-4406 for a free estimate, and we’ll walk your lot and spec the coating correctly before anyone talks about numbers.

The rust pathway nobody puts in the bid
Here’s what most fence quotes in Enterprise leave out. Your iron fence will fail at the post base and the weld joints long before it fails anywhere else. Those are the two places where moisture sits, where the coating is thinnest from handling, and where the alkaline caliche soil (pH 8.0-8.5 around this part of the valley) starts working on bare steel the first time the summer monsoon soaks the ground.
Standard oil-based primer breaks down under 115°F surface temperatures and relentless UV. Once that primer chalks and micro-cracks, the rust clock starts. In the southwest growth corridor, where subdivisions keep pushing toward the Sloan and Blue Diamond foothills, we see improperly coated iron showing rust streaks within three seasons. By year five to seven, the fence is compromised at the base even though the panels above still look fine.
The correct two-barrier system is hot-dip galvanizing on the raw steel first, then powder coating to a 2-3 mil dry film thickness. Galvanizing handles the electrochemical protection; the powder coat handles UV and abrasion. Primer plus powder coat alone is one barrier doing two jobs, and in this climate it doesn’t hold.
What drives your cost in Enterprise
- Fence height and linear footage. A 4-foot front-yard run costs less per foot than a 6-foot privacy-height iron perimeter because of panel count and post spacing.
- Prefab versus custom fabrication. Mild steel tubular panels ship in standard lengths. True custom iron with ornamental scrollwork is measured, cut, and welded to your site, which is where the $70-$120/ft range comes from.
- Coating spec. Galvanized-plus-powder-coat is the spec that lasts; ask for it in writing. Skipping the galvanizing step is the single most common reason a cheap bid turns expensive.
- Grade changes and raked panels. Sloped foothill-edge lots need individual pickets raked to follow the grade. Flat-lot pricing does not account for this.
- Gates, hardware, and automation. A drive gate with hinges, latch, and operator adds to the base run.

Wrought iron fence pricing in Enterprise
| Item | Installed cost range |
|---|---|
| Prefabricated steel tubular picket fence (per linear foot) | $45-$70 |
| Custom fabricated iron with ornamental detailing (per linear foot) | $70-$120 |
| Typical residential lot, standard run (lead range) | $3,500-$9,000 |
| Post-base sealing against alkaline caliche (per post) | Included in spec above $50/ft |
| Grade racking on sloped lots | Quoted per site |
One clarification worth making: most “wrought iron” fences going up in Enterprise today are mild steel tubular panels, not historically forged wrought iron. The corrosion performance is identical when the coating spec is right, so don’t pay a forged-iron premium unless you actually want the blacksmith look. See our full Fence Installation service if you’re comparing materials across the board.
The stucco-stain problem you’ll pay for later
Rust bleed from a badly coated post base doesn’t just look bad. Ferrous oxide stains stucco walls and concrete flatwork, and once it soaks in, you’re looking at acid washing to get it out. In Southern Highlands and Mountain’s Edge, where stucco exteriors are the norm and exterior maintenance is a real line item, a fence quote that skips the coating spec is quietly handing you a stucco repair bill two or three years down the road.
We’ve seen this play out on plenty of lots where the fence looked great at handover and stained the wall by the second monsoon. It’s the downstream cost the original quote never mentioned.
Custom lots and grade changes
Wrought iron and steel tubular fencing is the natural pick for the foothill-edge lots with real grade changes, and that’s most of the new construction in Enterprise. Individual pickets rake to follow slope without the panel-fabrication headaches you get with vinyl or wood. Our crews have set raked iron on exactly these lots, on engineered-fill pads where the ground moves and the posts have to be anchored accordingly. If you’re weighing materials on a sloped lot, Fence Installation in Enterprise lays out the comparisons, and our home page covers the full range of work we take on.
What the 730-Day Done Right Promise actually covers here
We back every installation with our 730-Day Done Right Promise. If a post base shows rust initiation or a weld joint opens within two years because of improper prep, we correct it. That’s the difference between a spec conversation and a marketing conversation. Our technicians have up to 12 years of experience, they’re background-checked and arrive in uniform, and your call is answered by a live person 24/7. Upfront pricing means the number in the estimate is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
FAQs
A standard residential wrought iron or steel tubular fence in Enterprise costs $45-$70 per linear foot for prefabricated panels, or $70-$120 per linear foot for custom fabrication, putting a typical installation between $3,500 and $9,000. Call (844) 797-4406 for an exact quote on your lot – estimates are free.
It depends on where the rust started. If it’s surface rust on the panels, recoating is usually cheaper than replacement. If rust has reached the post bases or weld joints, cutting out and re-setting those posts with a proper galvanized-and-coated spec is the only fix that lasts, and patching usually means repeating the problem in another few seasons. Call (844) 797-4406 and we’ll tell you honestly which way makes sense.
Call us and we’ll schedule your free estimate, and most jobs can be quoted in a single visit. Given the extreme heat here, we schedule installations around heat-safe working hours, so a same-week start is realistic for standard runs. Call (844) 797-4406 to get on the schedule.
Yes, and it’s often the best choice there. Individual pickets rake to follow grade without the panel-fabrication complexity of vinyl or wood, which is exactly why we use it on the sloped lots along the foothill edge. Call (844) 797-4406 and we’ll walk your grade and spec it correctly.
Get your wrought iron fence priced right
Don’t let a cheap bid cost you a stucco repair in three years. Groundwork Construction Co. of Enterprise specs the coating correctly, prices it upfront, and backs the work with our 730-Day Done Right Promise. Call (844) 797-4406 for a free estimate from a live person, any hour.
Written by the team at Groundwork Construction Co. of Enterprise, serving Enterprise, NV.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












