







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Enterprise Homeowners Choose Toto Construction
We provide independent Toto service in Enterprise: diagnosing the fill-valve, flush-tower and glazing problems these fixtures develop, quoting Toto-compatible parts, and rebuilding the bathrooms around them. What makes our Toto work different is that we treat the whole room, not just the tank. If the vanity is failing next to a leaking toilet flange, we fix both under one written scope. Groundwork Construction Co. of Enterprise is an independent service provider. We are not affiliated with, authorized by or endorsed by Toto, and we say so up front. Call (844) 797-4406 to talk through what your Toto is doing.
Why Trust Groundwork Construction Co. of Enterprise for Your Toto Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent crouched over Toto tanks in Enterprise bathrooms. They know the inside of a CST743 without a parts diagram: which fill valve wears first, which flush tower stops lifting cleanly, and where the supply line connects on a one-piece bowl that doesn’t want to come apart the way a two-piece does. That familiarity is what keeps a small repair small.
Parts matter as much as hands. We use genuine Toto OEM tank, fill and flush assemblies where the model calls for them, and quality aftermarket seals, wax rings and supply lines where an OEM badge buys nothing. That’s a warranty-safe approach: OEM internals inside the tank protect the fixture’s coverage, while the consumables below it are handled with parts that seal properly on a graded slab.
The work itself is backed by our 730-Day Done Right Promise. If a fill valve we set or a flange we reset isn’t right, we come back and make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to a $400 repair the same as a full remodel. Live people answer our phones around the clock, so a toilet running at 11 p.m. gets a real conversation, not a voicemail box.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Enterprise
These are the Toto failures we see most in Enterprise bathrooms, and what actually causes them.
- Weak or phantom flushes on the Drake (CST743 series). The fill valve or flush tower inside the tank has worn, so the bowl refills slowly or the flapper lets water seep past the seal and the toilet “ghost-flushes” on its own. It’s almost never a clog. It’s tired rubber and a tired tower.
- Wax-ring and closet-flange leaks. A rocking base, a stain spreading across the tile, or a faint sewer smell points to a failed wax ring or a flange sitting below the finished floor. On engineered-fill lots toward the foothills, slab movement can work a flange loose over time. The fix is resetting the bowl on a fresh ring and repairing the flange, not caulking over the symptom.
- Ultramax II fill-valve wear. The one-piece Ultramax II hides its fill assembly inside a tighter body than a two-piece tank. The valve wears out on the same schedule, but sourcing and swapping it takes more care, and a wrong part will fit loosely and run constantly.
- Washlet and Washlet+ (SW series) electronics and hoses. Enterprise’s hard water and heavy mineral content shorten the life of seat supply hoses and stress the electronic boards. Symptoms show up as a seat that won’t heat, a bidet wand that stops extending, or a slow drip at the T-connector behind the bowl.
- Vespin II glazing and seat-mount wear. Long sun exposure through a west-facing bathroom window degrades the glaze over years, and the seat-mount inserts wallow out. Worn-through glaze can’t be repaired, and that’s when replacement becomes the honest recommendation.
Toto Parts & Our Repair-vs-Replace Approach

We don’t claim to stock Toto parts locally. We identify the exact model and series on site, then source the right OEM fill valve, flush tower or tank-to-bowl gasket for that fixture before we schedule the repair. Quality aftermarket wax rings, closet bolts and braided supply lines round out the job. That split keeps the parts that affect how the toilet flushes genuine, and the parts that simply need to seal correctly cost-effective.
A Toto toilet is usually worth repairing. The ceramics hold up, the flush geometry is good, and a $200 to $500 repair on a fixture that would cost far more to replace is the sensible call. Replacement becomes honest when the ceramic is cracked, the bowl glaze is worn through and staining won’t lift, or the flange is so deteriorated that resetting isn’t reliable. We tell you which one you’re looking at before any work starts. Upfront pricing, no surprises: the number you approve is the number you pay. Call (844) 797-4406 and we’ll talk through the symptoms.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We identify the exact model and series, then test the fill valve, flush tower, flapper seal and supply line individually. We check the closet flange for movement and the floor around the base for seepage, because a running toilet and a leaking flange are two different repairs.
- 2
Scope and quote. You get a written line-item quote covering the Toto repair and anything adjacent that’s failing, like a vanity or tile, priced against the Enterprise ranges below. No change orders mid-job.
- 3
Repair or install. OEM fill and flush components go in, the bowl gets reset on a fresh wax ring if there’s any rocking, and any bathroom remodel work around the fixture is sequenced so the toilet goes back last.
- 4
Test. We run multiple flush cycles, check for seepage at the base, confirm the fill stops cleanly, and verify any Washlet seat functions before we call it done.
- 5
Warranty. Every Toto repair and bathroom remodel we perform is covered by the 730-Day Done Right Promise, in writing. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Enterprise
We work on the Toto fixtures most common in Enterprise homes: the Drake (CST743 series) two-piece toilet, the Ultramax II one-piece, the Vespin II, and the EcoPower and Washlet (SW) bidet seats. That covers tank and fill assemblies, flush towers, wax rings and flanges, seat electronics, and supply-hose replacement. When a Toto fixture sits inside a larger project, we coordinate the Small Bathroom Remodel, Bathroom Vanity Installation or full Bathroom Remodeling scope around it so the toilet, vanity and tile all land in the right order. We install Toto-compatible parts and fixtures; we don’t claim to be a Toto dealer.
We Also Service These Brands
Groundwork Construction Co. of Enterprise isn’t a single-brand shop. Alongside Toto, we service and install KraftMaid cabinetry, Kohler fixtures, GAF roofing systems and PGT windows and doors, backed by a curated set of verified brand partners across every trade we handle. That means one contractor can carry a Toto bathroom refresh through the vanity, the tile and the roof above it without you coordinating three crews.
FAQs – Toto Construction Service in Enterprise

Is Groundwork Construction Co. of Enterprise authorized by Toto? No. We’re an independent service provider with hands-on familiarity with Toto fixtures, not an authorized Toto dealer or warranty agent. We install genuine Toto OEM parts where the model calls for them and handle the rest of the bathroom work ourselves.
Do you use genuine Toto/OEM parts? Yes, for tank, fill and flush assemblies. We use genuine Toto OEM fill valves, flush towers and tank-to-bowl gaskets, paired with quality aftermarket seals, wax rings and supply lines. That keeps the parts that control flushing genuine while keeping the repair cost reasonable.
How long does Toto service take? Most individual Toto repairs, like a fill valve or flush tower replacement, are completed in a single visit. A bathroom remodel that includes the toilet area runs longer, and you’ll get a written schedule with your quote before anything starts.
What Toto models/series do you cover? We cover the Drake (CST743 series), the Ultramax II one-piece, the Vespin II, and the EcoPower and Washlet (SW) bidet seats, including tank internals, flange and wax-ring work, and seat electronics.
Will service void my Toto warranty? Not when it’s done correctly. Using genuine Toto OEM internals where the model requires them, and resetting the fixture properly, keeps your coverage intact. We’ll tell you upfront if a repair could affect your warranty before we touch anything.
How much does Toto construction cost in Enterprise? Individual Toto repairs typically run far less than a remodel, while bathroom work around the fixture lands in these ranges:
| Service | Price Range |
|---|---|
| Small Bathroom Remodel | $5,000 – $12,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Call (844) 797-4406 for an exact quote. Estimates are free.
Book Your Toto Service in Enterprise, NV
Whether it’s a Drake that won’t stop running, an Ultramax II that needs its fill valve, or a small bathroom remodel built around the Toto you already have, we’ll give you a straight answer and a written quote. Background-checked, uniformed technicians on every job. 730-Day Done Right Promise on the work. Call (844) 797-4406 to schedule your free estimate in Enterprise.
Written by the team at Groundwork Construction Co. of Enterprise.












