







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWhat Chain Link Fence Costs Per Foot in Enterprise, NV
Chain link fence in Enterprise runs $18 to $36 per foot installed, depending on wire gauge and coating: 11.5-gauge galvanized lands at $18-$26/ft, 9-gauge galvanized at $22-$30/ft, and 9-gauge vinyl-coated at $26-$36/ft. For a typical 150-foot residential perimeter, that’s $3,500 to $9,000 all-in. Most Enterprise jobs get a written, itemized quote the same week. Call (844) 797-4406 and we’ll price your exact run, gauge, and post schedule over the phone before anyone comes out.
Chain link gets sold as the low-maintenance, long-life pick. Mostly it is. But in Enterprise’s alkaline caliche-and-mineral soil, a standard 11.5-gauge galvanized install starts showing corrosion at the tension-bar contact points and bottom rail within 5 to 7 years. Upgrade the spec or plan on replacing it. That’s the whole decision, and it’s the one most per-foot quotes quietly make for you.

Why the Cheapest Gauge Fails Faster Here
Enterprise’s desert soil is high in calcium carbonate (caliche) and mineral salts. When the ground gets wet, those salts act as an electrolyte, and they sit right against the steel. Galvanized wire depends on its zinc coating to stay intact, but installation abrades that coating exactly where it matters most: the tension-bar holes and the bottom rail clips. Once bare steel is exposed at those contact points, galvanic corrosion starts eating the wire from the inside of the joint out.
The monsoon season makes it worse. Flash-flood-prone washes push water against fence lines and footings, then the ground dries out. Wet, dry, wet, dry. Every cycle drives the reaction a little deeper. We’ve pulled 11.5-gauge sections on foothill-edge lots that were rusting through at the bottom rail while the rest of the mesh still looked fine.
Vinyl-coated mesh changes the equation. The vinyl sleeve keeps a protective barrier over the steel at every contact point, not just the open spans. It costs $4 to $10 more per foot than galvanized 9-gauge, and on a permanent residential perimeter in this soil, it’s usually the cheaper decision over the life of the fence.
Installed cost by spec in Enterprise
| Spec | Cost per linear foot (installed) | Best use here |
|---|---|---|
| 11.5-gauge galvanized | $18-$26 | Temporary enclosures, short-term runs |
| 9-gauge galvanized | $22-$30 | Standard residential, moderate exposure |
| 9-gauge vinyl-coated | $26-$36 | Permanent perimeter, high-mineral soil |
Read that table honestly: the 11.5-gauge galvanized price is real, and it’s the right number for a construction-site enclosure or a temporary dog run. It is not the right spec for a permanent fence on a Southern Highlands or Mountain’s Edge lot where the fence will stand for 20 years against caliche. National lifespan charts assume neutral soil. Enterprise isn’t neutral soil.
Post Footings Decide Whether Your Fence Stays Straight
A chain link fence transfers all of its wind load through the posts and footings. There’s no panel rigidity to help it, the way a vinyl or composite panel shares the load. That means footing depth and diameter aren’t a detail; they’re the structure.
National spec sheets often show a 24-inch footing. In Clark County soil, on lots that see monsoon saturation, that’s not enough. We set footings at 36 inches minimum, sized to the post and the wind exposure, so line posts don’t lean after two or three wet seasons. On sloped, engineered-fill pads near the Sloan and Blue Diamond foothills, footing diameter matters even more, because fill soil compacts and settles differently than native ground.
Poorly sized footings show up as lean first, then sagging fabric, then gates that won’t latch. By the time a homeowner calls us about a gate that drags, the footings have usually been moving for a year. Ask any fence quote you get what footing depth and diameter it assumes. If the answer is vague, the 24-inch number is probably hiding in there.

The Defensible-Space Advantage Nobody Mentions
Chain link is one of the few fence materials that fits wildfire-defensible-space guidance cleanly. It creates a non-combustible perimeter that doesn’t hold embers and doesn’t block firefighter access. For Enterprise lots that back onto open desert, that matters. Wood and vinyl fences are fuel. They also interrupt the clearance zone that defensible-space standards rely on.
Enterprise grew as Las Vegas’s southwest growth corridor, and the subdivisions pushing toward the mountains’ edge run right up against open land. On those lots, a chain link perimeter does double duty: property line and fire break. It’s not the reason most people pick chain link, but on a foothill-edge lot, it’s a real reason not to rule it out. For homeowners weighing materials side by side, our Fence Installation in Enterprise page breaks down how chain link compares with vinyl and aluminum on the same lots.
What a Groundwork Quote Actually Shows
Most per-foot numbers are black boxes. You get “chain link fence, 200 linear feet” and a total. Then the gauge, coating, post schedule, and footing spec get decided by whoever’s cheapest that week.
A Groundwork quote itemizes all four. Gauge. Coating. Post spacing and schedule. Footing depth. Every line itemized, so you can see exactly what the per-foot number buys. That’s what “upfront pricing, no surprises” means in practice: the number you see is the number you pay, and you can read why it’s that number.
Installation is done by background-checked, uniformed technicians, not a subcontracted crew working off an unmarked truck with no accountability. Most residential chain link jobs finish in a single visit. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person, 24/7, so you’re never waiting until Monday for an answer about a gate that won’t close.
- Itemized per-foot quote: gauge, coating, post schedule, and footing depth spelled out.
- 36-inch minimum footings sized for Clark County soil and wind exposure.
- 730-Day Done Right Promise on every install.
- Live person, 24/7 when you call (844) 797-4406.
- Upfront pricing plus 0% financing for 18 months and $1,000 off projects over $10,000.
If your project grows into something bigger, we also handle pavers, roofing, windows, and additions, so you can keep one contractor from foundation to finish line. See what we do across our home services. For the full picture of how chain link fits into a larger fencing plan, the Fence Installation service page covers material comparisons and site prep in more detail.
FAQs About Chain Link Fence Cost in Enterprise
Chain link fence in Enterprise costs $18 to $36 per foot installed, depending on gauge and coating. The 11.5-gauge galvanized option runs $18-$26/ft, 9-gauge galvanized runs $22-$30/ft, and 9-gauge vinyl-coated runs $26-$36/ft. On a typical 150-foot residential perimeter, that’s $3,500 to $9,000 total. Call (844) 797-4406 for an exact quote on your run; estimates are free.
Only for temporary enclosures. In Enterprise’s alkaline, high-mineral soil, 11.5-gauge galvanized fence starts showing corrosion at tension-bar contact points and bottom rail clips within 5 to 7 years, so it’s the wrong spec for a permanent residential perimeter. For a fence you expect to last decades, 9-gauge vinyl-coated mesh at $26-$36/ft is what we recommend. Call (844) 797-4406 and we’ll walk you through the specs on your lot.
We set footings at 36 inches minimum in Clark County soil, not the 24-inch depth many national spec sheets list. Chain link transfers all its wind load through the posts and footings, and on monsoon-flood-prone Enterprise lots, undersized footings cause line post lean within two or three wet seasons. Call (844) 797-4406 to get a footing spec in writing before you hire.
Yes. Most Enterprise homeowners get a written, itemized quote within a few days, and many get it over the phone. We itemize gauge, coating, post schedule, and footing depth, so there’s no black-box per-foot price. Call (844) 797-4406; a live person answers around the clock, and estimates are free.
Get Your Per-Foot Number in Writing
The per-foot price is only useful if you know what’s behind it. Call (844) 797-4406 for a free estimate on your Enterprise chain link fence. We’ll quote gauge, coating, posts, and footings line by line, most jobs go in a single visit, and the 730-Day Done Right Promise backs the installation. Upfront pricing, no surprises.
Written by the team at Groundwork Construction Co. of Enterprise, serving Enterprise, NV.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












