







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Enterprise?
A custom window and door order for a typical Enterprise home runs about $4,500 to $15,000 installed, with most single-room projects landing near $6,000 to $9,000. Custom sizing and premium materials push whole-house orders toward $8,000 to $25,000. The order itself (the actual product cost) usually accounts for roughly 55 to 70 percent of the total, with installation labor, disposal, trim work, and permit fees making up the rest.
That’s the short answer. The longer one depends on what you’re replacing, how far from standard sizing you’re going, and which materials you choose. Enterprise sits in a high-desert climate with summer highs over 100°F and winter lows dipping near freezing, and that swing matters more than most homeowners expect. Windows and doors in this city have to handle UV load, wind-driven dust, and a thermal range that punishes cheap materials. We’ll walk you through real numbers below so you can budget with confidence.

Custom Window & Door Order Cost Breakdown (2026)
Here’s what Enterprise homeowners are paying for custom window and door work this year. Ranges reflect standard to premium tiers, installed, including the 730-Day Done Right Promise that covers workmanship on every project we take on.
| Line Item | Typical Installed Cost |
|---|---|
| Single custom window (standard size, mid-grade) | $450 – $1,200 |
| Single custom window (oversized or complex shape) | $1,100 – $2,500 |
| Custom entry door (fiberglass or steel, installed) | $1,200 – $3,800 |
| Custom patio sliding or French door (per unit) | $2,200 – $6,500 |
| Full window replacement, single room (2 – 4 openings) | $4,500 – $15,000 |
| Whole-house custom window order (8 – 15 openings) | $8,000 – $25,000 |
| Door + window package (entry + 3 – 5 windows) | $3,800 – $9,500 |
| Trim, flashing and finish carpentry (per opening) | $150 – $450 |
| Old unit removal and disposal (per opening) | $75 – $225 |
What drives the price up or down. Three things move the needle most. First, sizing: a window that fits a standard opening costs far less than one built to a non-standard dimension, because custom fabrication adds lead time and shop cost. Second, material: vinyl is the budget option, fiberglass and wood-clad aluminum sit mid-range, and premium brands like Andersen and Marvin push toward the top. Third, scope: replacing one door is a small job; re-ordering every window and exterior door in the house is a full project with sequencing, staging, and finish work. If you’re bundling this with other exterior work, our home construction team can sequence it so you’re not paying twice for the same prep and disposal.
What Affects Custom Window & Door Order Pricing in Enterprise
Enterprise isn’t a generic market, and custom window and door pricing here reflects that. A few factors play out differently in this city than they would in, say, a coastal climate.
- Desert heat and UV exposure. Windows facing south or west in Enterprise take intense sun for most of the year. Low-E glass and heat-mirror coatings are worth paying for here, and they can add $80 to $200 per window over a basic glazed unit. Skipping them tends to show up as warped vinyl and faded frames within a few summers.
- Dust and wind-driven grit. Spring wind in the valley pushes fine dust against seals and weatherstripping. Doors and windows with better gasketing (a mid-tier upgrade) hold up noticeably longer. We regularly see sliding door tracks in Enterprise clogged and grinding after three or four years when the seal quality is low.
- Wall construction and reframing. Many Enterprise homes have stucco exteriors, and cutting or resizing an opening means stucco repair as part of the job. That trim and repair line item can run $150 to $450 per opening, sometimes more on a custom-sized opening.
- Brand and material tier. Our window and door orders pull from Andersen, Pella, and equivalent brands, alongside value options. The same opening can swing 40 to 60 percent depending on which tier you pick.
- Lead time and order size. Custom fabrication schedules depend on the manufacturer. Ordering everything at once usually costs less per unit than placing piecemeal orders, and it simplifies the install sequence.
- Permits and HOA guidelines. Some Enterprise neighborhoods require exterior changes to match existing window styles or colors. Checking before you order avoids a re-order, which is the single most expensive mistake on this type of project.

How Much Does the Order Itself Cost vs. the Installation?
The product order typically accounts for 55 to 70 percent of your total, while installation and finish work make up the rest. On a $9,000 project, expect roughly $5,500 to $6,500 in product and $2,500 to $3,500 in labor, trim, flashing, disposal, and permit coordination.
Homeowners often ask why installation costs what it does. A window or door install isn’t just dropping a unit into a hole. It’s removing the old one without damaging surrounding finishes, checking the rough opening for square, flashing the sill and sides so water doesn’t get behind the stucco, insulating the gap, setting trim so it reads clean, and sealing everything. On a door, it also means hardware installation and making sure the threshold sits level. Miss any of those steps and you get air leaks, water intrusion, or a door that sticks by the second summer. This is the part of the job where the 730-Day Done Right Promise earns its keep: if something’s off, we make it right, and that coverage runs nearly two years beyond what most contractors offer.
Is It Cheaper to Repair or Replace My Windows in Enterprise?
For a single failed window, repair is usually cheaper: $150 to $400 for a glass or hardware fix versus $450 or more for a full replacement. But once two or more windows in a room fail, or the frames themselves are warped or fogged, replacement wins financially.
Here in Enterprise, we see the same pattern repeatedly: a homeowner repairs one window in a sun-exposed room, then another fails months later, and by the third repair they’ve spent what a new set would have cost. If your windows are original builder-grade units and you’re facing the second or third repair, the math points toward a fresh order. Our Enterprise service area page lists what we handle locally, and a free estimate will tell you which side of that line you’re on.
How Long Does a Custom Window & Door Order Take in Enterprise?
From signed order to finished install, plan on 4 to 10 weeks. Custom fabrication is the long pole: standard-size doors and windows typically arrive in 3 to 5 weeks, while truly custom sizes and complex shapes can take 8 to 12 weeks. Installation itself is fast, usually 1 to 3 days for a single room, and about a week for a whole-house order.
Timing matters more in Enterprise than in milder climates. Ordering in early spring means you’re installing before peak heat, when sealants and adhesives cure predictably. Ordering in late fall can mean installs happening during cold snaps, which complicates exterior sealing. If you’re coordinating this with other work, our roofing team and window crews can stage projects together so your home isn’t torn open twice.
How to Save on a Custom Window & Door Order
There’s real money to recover here without cutting the quality of the product. A few moves that work:
- Order the whole project at once. Combining windows and doors into a single order usually lowers per-unit cost and cuts installation trips. Piecemeal ordering is more expensive per opening.
- Prioritize the problem openings. If budget is tight, replace the worn windows and doors first, not every opening in the house. South and west-facing windows in Enterprise fail first, so start there.
- Pick mid-tier where it counts. Spend on glass coatings and seals, save on frame finish options. The performance upgrade outlasts the cosmetics.
- Use the standing offers. We offer $1,000 off projects over $10,000 and 0% financing for 18 months. A whole-house window order often clears the $10,000 line, so that discount applies directly.
- Get the free estimate and design consult first. A firm upfront number keeps you from over-ordering or missing trim and disposal costs that get added later. Call (844) 797-4406 for that free estimate.
Should I Bundle Windows With Other Exterior Work?
Often yes, because the same crew and the same prep can cover multiple trades. If you’re already planning a bathroom remodel or a kitchen remodel, ordering the windows for those rooms alongside the remodel saves on labor and scheduling. And if you’re adding on, our home addition and ADU team orders windows as part of the build, so you’re not paying for a separate order and install.
When you’re ready to price the whole scope, our windows and doors service team can put together a line-item estimate that separates product from labor, so you see exactly where the money goes. That transparency is part of our commitment to upfront pricing, no surprises.
FAQs – Custom Window & Door Order Cost
How much does a custom window cost in Enterprise?
A single custom window in Enterprise typically runs $450 to $1,200 for a standard size and mid-grade material, and $1,100 to $2,500 for oversized or complex shapes. The product is most of that cost; installation, trim, and disposal add the rest. Call (844) 797-4406 for an exact quote, and the estimate is free.
Is it cheaper to replace windows one at a time or all at once?
All at once is usually cheaper per opening, often 10 to 20 percent less than piecemeal orders because fabrication, shipping, and install trips are shared. A single-window replacement still makes sense if only one opening has failed. Expect $4,500 to $15,000 for a full room, or $8,000 to $25,000 for a whole-house order in Enterprise. Call (844) 797-4406 and we’ll price both options so you can compare directly.
Do I need a permit for window and door replacement in Enterprise?
Yes, in most cases. Like-for-like replacements sometimes move through with a simple permit, but any change to opening size, structural framing, or egress path requires a permit and inspection. Your city permit and inspection fees typically run $150 to $600 depending on scope. We handle permit coordination as part of the project. Call (844) 797-4406 to talk through your specific address and scope.
How much does a custom entry door cost in Enterprise?
A custom fiberglass or steel entry door installed in Enterprise runs $1,200 to $3,800, and a sliding or French patio door runs $2,200 to $6,500. Door hardware and threshold work are included in those ranges. For a firm number on your exact door, call (844) 797-4406 – estimates are free and there’s no pressure.
Can you come out today for a window and door estimate?
We answer calls around the clock with a live person, so call any time and we’ll schedule your free estimate promptly. Most Enterprise estimates happen within a few days of your call, and many sooner. The visit includes measuring each opening and a line-item quote separating product from labor. Call (844) 797-4406 right now and we’ll get you on the schedule.
Why Homeowners in Enterprise Choose Groundwork Construction Co.
Custom window and door orders involve real money, long lead times, and a list of details that’s easy to get wrong. That’s where we come in. Our technicians have up to 12 years of experience, every one of them is background-checked and arrives in uniform, and calls are answered by a live person 24 hours a day, seven days a week. No voicemail, no waiting until Monday.
Every project we take on is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to your window and door install from day one through year two. We also bring a curated set of brand partners to every project, from Andersen and Pella in windows to KraftMaid, Kohler, GAF, and James Hardie across other trades, so you’re choosing quality, not just whatever’s on the shelf.
If you’re comparing bids and one number looks dramatically lower, ask what’s excluded: trim, flashing, disposal, permit fees, or stucco repair. Upfront pricing means the number you see is the number you pay, and we put that in writing. From foundation to finish line, we’re the single contractor who handles the whole scope. Call (844) 797-4406 for a free estimate and design consult today.
Pricing reflects the Enterprise market as of 2026. Groundwork Construction Co. of Enterprise offers free estimates – call (844) 797-4406.
What Our Customers Say
"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."
- Robert Sullivan"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."
- Angela Wong"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












