







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Spring Valley, NV: What You’re Actually Getting
Paver driveway installation in Spring Valley runs $7,000 to $18,000, and most jobs take 3 to 5 working days from demo to first drive-on. That number covers excavation of the old slab or surface, a compacted base, and the pavers themselves, but the spread between the low and high end comes down to square footage, base depth on caliche soil, and which paver line you pick. Call (844) 797-4406 and we’ll walk your driveway in person – the estimate is free and the pricing is fixed before we lift a shovel.
From Demo to Drive-On: How a Paver Driveway Gets Built

What we hear most from Spring Valley homeowners is that the first bid they got was three lines on a napkin. Here’s the actual sequence we run, stage by stage, so you know what’s happening on your property and when you need to make a decision.
Day 1: Demo and excavation
We break out the existing concrete, asphalt, or worn pavers and haul the debris off. On the 1990s-2000s tract homes along the Durango and I-215 corridor, we often find a 4-inch builder slab over thin base, which is exactly why it cracked. Excavation goes down 8 to 12 inches depending on the paver thickness and the base depth we need. You’ll decide at this point whether to keep any existing edging or let us replace it.
Day 1 – 2: Grading and base compaction
This is where a driveway lives or dies in the desert. We grade for positive drainage away from the garage and toward the street, then lay and compact aggregate base in lifts of 2 to 3 inches. Spring Valley’s caliche and expansive soils can force deeper removal in spots, and we flag that before we start, not after. You’ll approve the final slope before any sand goes down.
Day 2 – 3: Edge restraint and bedding sand
We set the edge restraint and screed the bedding sand to a consistent depth. The restraint is what keeps the field from spreading under summer heat and vehicle weight, and it’s the detail most cheap bids skip. If you’re doing this as part of a full Driveway & Pavers in Spring Valley project alongside a patio or walkway, we coordinate the restraint runs so the surfaces tie together cleanly.
Day 3 – 4: Paver installation and cutting
The field goes in, then the pattern, then all cuts at the garage apron, street transition, and any curves. Cuts get made with a wet saw to keep the edges tight. This is the day you see the driveway take shape, and it’s also when you can still change your mind on pattern direction without a big rework cost.
Day 4 – 5: Joint sand, compaction, and final walkthrough
Polymeric joint sand goes in and the whole field gets a final plate compaction pass. We do a walkthrough with you, check drainage with a hose test, and hand over the written 730-Day Done Right Promise. If anything settles or shifts in that window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Paver Driveway
Once the base is right, the pavers are where your budget and your taste meet. Here’s the honest trade-off on each.
- Standard concrete pavers (4-inch, 60mm) – The workhorse for Spring Valley driveways. $7,000 to $12,000 on a typical two-car driveway, holds up to desert UV and vehicle loads, and the interlocking pattern flexes with soil movement instead of cracking like a slab.
- Premium or tumbled pavers – Push toward the $14,000 to $18,000 end. Heavier, denser, better color retention over 15-plus years of 110°F summers, and the weathered look suits the Mediterranean and Southwestern stucco homes common in the gated tracts here.
- Belgard or Unilock lines – Both make desert-rated pavers with a color-through body, so a chip doesn’t show a different color underneath. Belgard’s structured slab systems and Unilock’s tumbled series are the two we install most in Spring Valley.
- Permeable pavers – Worth considering on lots with poor drainage or where monsoon runoff pools at the garage apron. Higher material cost, but they move water instead of trapping it.
- Pattern and layout – Herringbone and running bond cost less to lay than complex ashlar patterns because of cut waste. Ask what your pattern does to the square-foot number before you fall in love with it.
What Paver Driveways Cost in Spring Valley, NV

For a standard two-car driveway, expect $7,000 to $18,000 installed. The five things that move that number:
- Square footage – A single-car driveway sits at the low end; a three-car or RV-width driveway pushes past the middle of the range.
- Existing surface – Hauling out a thick concrete slab costs more than pulling up worn pavers or gravel.
- Base excavation depth – Caliche or expansive soil that requires over-excavation adds labor and haul-off.
- Paver grade – Standard concrete pavers vs. premium tumbled or permeable lines is the biggest single swing.
- Drainage and grading scope – Adding a channel drain or regrading toward the street adds cost but prevents the pooling problem that ruins driveways in this climate.
A written estimate from us is line-itemed and fixed: excavation, base, restraint, pavers, joint sand, and cleanup. What it typically doesn’t include is HOA architectural review fees if your community charges them, or changes to the garage apron if the existing one has failed. We flag those before work starts so the number you see is the number you pay. Call (844) 797-4406 for an exact quote on your property.
See the difference
Before
After
Before
After
Before
AfterWhy Spring Valley Driveways Are a Different Job
Spring Valley is an unincorporated Clark County township, not its own city, which means construction here is permitted through the Clark County Department of Building & Fire rather than a municipal office, and much of that review happens before any private HOA architectural review clears your driveway color and pattern. On top of that, the 89113 beltway corridor along I-215 and Durango was built out fast through the 1990s and 2000s as master-planned and gated subdivisions, so we’re working in tract-home and custom-lot infill where you’re juggling county permitting and HOA approval before a single paver gets set. The Mojave heat and UV also mean a pavement surface that gets 105 to 115°F summers takes a beating, and monsoon flash flooding plus expansive desert soils make drainage and base depth non-negotiable here. We serve the whole Spring Valley area, and our driveway & pavers service covers the full range of surface work.
Serving Spring Valley, NV – Our Local Coverage Area
We serve Spring Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Spring Valley

Most paver driveways in Spring Valley take 3 to 5 working days once we start, with a standard two-car job usually landing at 4. Weather and HOA review timing can push it if the review runs long, but the install itself is weather-dependent mainly on the base and compaction days. Call (844) 797-4406 to get on the schedule and lock a start date.
Driveway resurfacing often doesn’t require a county building permit, but new driveways, changes to the street approach, and drainage work can, and your HOA will almost certainly require architectural approval regardless. We walk you through what applies to your lot and pull what’s needed before demo. Call (844) 797-4406 to talk through your specific address.
Sometimes, but only if the existing slab is sound, properly graded, and thick enough to serve as base – which is rare on the 1990s builder slabs we see in Spring Valley. Most of the time we recommend full removal so the base and drainage get done right. We’ll tell you honestly which applies to your driveway during the estimate.
Every paver driveway we install is covered by our 730-Day Done Right Promise. If the base settles, a section shifts, or the work isn’t right, we come back and fix it. That’s one of the longest workmanship guarantees in residential construction, and it’s in writing. Call (844) 797-4406 for a free estimate.
Paver driveways in Spring Valley run $7,000 to $18,000 installed for a standard two-car driveway, depending on square footage, base conditions, and paver grade. Premium or permeable lines and over-excavation push toward the top; a single-car or partial replacement sits lower. Call (844) 797-4406 for a free on-site estimate – we don’t quote from photos.
Get a Free Paver Driveway Estimate in Spring Valley
We come to your property, measure the driveway, check the base and drainage, and hand you a written line-item estimate before you commit to anything. That’s part of our driveway & pavers work, and homeowners often pair this with Door Installation in Spring Valley or Cabinets & Countertops in Spring Valley when they’re already updating the home. Call (844) 797-4406 – a live person answers, and the estimate is free. You can also see our broader Driveway & Pavers service to plan the full project.
Written by the team at Groundwork Construction Co.












