







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Enterprise, NV: What the Job Actually Involves
Paver driveways in Enterprise, NV typically run $7,000 – $18,000 installed, and most residential jobs finish in 3 – 6 working days once materials land on site. The work is a full tear-out and rebuild: excavate the old surface, compact a base, set edge restraint, lay the pavers, cut and sand the joints. If your lot sits up toward the foothills, grading and drainage take longer than the paving itself. Call (844) 797-4406 for a free on-site estimate and a written line-item quote.
Stage by Stage: How We Build a Paver Driveway

No two Enterprise driveways run identical, but the sequence below is the one we follow on nearly every job. What changes is how long each stage takes, and that comes down to your lot.
1. Site visit and layout (day 1, 1 – 2 hours)
We measure the existing apron, check the grade from the street to the garage, and look at where water wants to go. On sloped lots near Mountain’s Edge this is the most important hour of the whole job, because a driveway that sheds water toward the house is a future foundation problem, not a paving problem. You decide the paver style and the drainage direction here.
2. Tear-out and haul-off (day 1 – 2, 4 – 8 hours)
Old concrete, asphalt or failing pavers come out and go to a recycler. We protect the garage door and stucco during demo. On tight desert lots with a single gate, this stage takes longer because everything leaves in one direction, so access planning matters more than muscle.
3. Base prep and compaction (day 2 – 3, 1 – 2 days)
This is where a driveway either lasts 20 years or fails in three. We excavate to depth, lay and compact class II base in lifts, and check grade constantly. In Enterprise’s soil, that means accounting for how the ground moves after monsoon moisture. You don’t decide anything here; we just keep you posted.
4. Edge restraint and paver laying (day 3 – 5, 2 – 3 days)
Concrete or aluminum edge restraint goes in before a single paver. Then the field pavers get laid, cut along the edges and around the garage apron, and pattern-matched so the joints line up. A 600 sq ft driveway is roughly two solid days for a crew. Larger lots with curves or a border course add a day.
5. Joint sand and final walk (day 5 – 6, half day)
Polymeric sand fills the joints, gets compacted in, and we walk the finished driveway with you. Any cuts, chips or grade issues get flagged and fixed before we pack up. That final walk is when most homeowners realize the driveway changed the whole look of the front of the house.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The paver itself drives both the look and the price, and the honest answer is that the cheapest paver isn’t always the bargain. Here’s what most Enterprise homeowners weigh:
- Concrete pavers (Belgard and similar): the workhorse choice, roughly $6 – $12 per square foot installed. They hold up to 105°F summers, resist fading and cracking, and can be pulled and reset if a utility line needs work. Best all-around pick for most tracts here.
- Clay brick pavers: warmer color, higher cost, harder to install cleanly on a curve. Great on custom foothill homes where the driveway gets noticed. Slightly more maintenance over decades.
- Tumbled vs. straight-edge finish: tumbled pavers look older and soften the harsh desert light. Straight-edge reads cleaner and more modern on newer stucco homes. Tumbled costs a bit more.
- Pattern: herringbone is the most durable for driveways because it locks pavers together under tire load. Running bond and basketweave cost less to lay but shift more over time.
- Border course and color: a contrasting border adds roughly 5 – 10% to material cost and visually frames the driveway. Worth it on Southern Highlands lots where curb appeal counts.
What Paver Driveways Cost in Enterprise, NV

Plan on $7,000 – $18,000 for a full paver driveway in Enterprise, with most single-family lots landing between $10,000 and $14,000. The final number depends on five things:
- Square footage: a two-car driveway is the baseline; RV pads, three-car aprons and turnaround areas push it toward the top of the range.
- Existing condition: a flat concrete slab tears out cheaply. A failed asphalt drive with soft subbase means more excavation and more base material.
- Drainage and grade: sloped foothill lots need more base work, retaining considerations and careful slope management, which adds labor.
- Paver grade and pattern: standard concrete pavers with running bond is the low end; clay brick, herringbone and border courses are the high end.
- Access and staging: tight driveways with no room to stage material mean more hand-carrying and a longer job.
Every estimate is written line-item: square footage, base depth, paver type, edge restraint, sand, haul-off. No surprises once work starts. There’s also a $1,000 credit on projects over $10,000, and 0% financing for 18 months if you’d rather spread the cost. Call (844) 797-4406 for an exact quote, and estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is the southwest growth corridor of the valley, and that shows up directly in how a paver driveway gets built here. Most of the housing stock dates from the 1990s to present, dominated by stucco-and-tile tract homes in communities like Southern Highlands and Mountain’s Edge, plus custom homes creeping toward the Sloan and Blue Diamond foothills. What that means for paving is that lots are increasingly sloped, engineered-fill pads rather than the flat infill you see in older parts of the valley. On those lots, the base prep and drainage work carry the job. HOA rules in the master-planned communities also matter: color palettes, border requirements and square-footage limits are common, and it’s worth checking your HOA guidelines before locking a paver color. Permits and inspections for driveway work get pulled through the county, and we handle that as part of the job. This is also where we see the most failure: sunbaked concrete from the early 2000s, cracked along the control joints and lifting at the edge near the street. Paver driveways solve that failure mode permanently because the joints flex instead of cracking. You can tie our paver work into a wider scope with Driveway & Pavers in Enterprise if you’ve got more than just the driveway to do, and homeowners often pair this with Door Installation in Enterprise when the front entry is getting upgraded at the same time.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Enterprise

Most paver driveways in Enterprise finish in 3 – 6 working days, with larger sloped lots running to about a week. Material delivery and weather set the clock more than anything else, and summer heat means we often start early to avoid the worst of it. Call (844) 797-4406 to get a firm timeline on your address.
Yes, most paver driveway work in Enterprise requires a county permit and inspection, especially when the footprint or grade changes. We handle the paperwork and the inspection as part of the job, so you’re not chasing the county. Call (844) 797-4406 to talk through your specific project.
Rarely, and we’d rather be honest than sell you a shortcut. Overlay jobs only work on solid, well-draining concrete with no cracking or heaving, and most of what we pull out in Enterprise isn’t in that shape. The money you’d save on tear-out usually comes back as a failure three years later. Call (844) 797-4406 and we’ll tell you straight whether yours qualifies.
Expect $7,000 – $18,000 installed, with most single-family driveways landing between $10,000 and $14,000. Size, existing surface condition, drainage and paver grade move the number most. Call (844) 797-4406 for an exact written quote, and estimates are free.
Every paver driveway we install is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on base prep, layout and joint sanding for over two years. Call (844) 797-4406 to get the written warranty terms before you commit.
Get Your Free Paver Driveway Estimate in Enterprise
We’ll come out to your Enterprise property, walk the grade, measure the driveway and put a written line-item estimate in your hands. That’s the whole visit. No pressure, no sales script, just numbers you can compare. We cover all of Enterprise and the surrounding southwest valley, and our Driveway & Pavers service also handles the wider scope if you’re reworking more of the yard. Homeowners upgrading the inside of the house often pair this with Cabinets & Countertops in Enterprise. Call (844) 797-4406 today, and we’ll get your estimate on the calendar.
Written by the team at Groundwork Construction Co. of Enterprise.












