







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Enterprise, NV: What the Job Actually Involves
Door installation in Enterprise, NV typically runs $450 to $1,900 per door for interior replacements, and $1,200 to $4,500 for a quality exterior entry door, with most interior swaps finished in a single day. Exterior entries take longer because of framing, flashing, and stucco repair. Call (844) 797-4406 for a free on-site estimate and a written line-item quote before anything gets ordered.
How Door Installation Works, Stage by Stage

Every job follows a sequence, and knowing it tells you when to make decisions and when to stay out of the way.
Stage 1: Measure and rough opening check (day 1, about 60 – 90 minutes)
We measure the rough opening, not just the existing door slab. In Enterprise’s 1990s-to-present stucco homes, that means checking whether the wall is plumb and whether the existing frame was shimmed square at the build. You decide door style and swing direction here, and we confirm the rough opening can take the size without re-framing. If it can’t, you hear it now, not after demo.
Stage 2: Demo and prep (day 1, 2 – 4 hours)
The old door, casing, and threshold come out. On tract homes along the Southern Highlands and Mountain’s Edge corridors, the framing is usually sound, and the surprise is inadequate flashing or a rotted sill from sun-driven rain. We cut back to solid material and rebuild the opening square and level before anything new goes in.
Stage 3: Set, shim, and flash (day 1 into day 2)
The new unit gets shimmed at hinges and lockset, checked for a consistent reveal on all four sides, and flashed at the head and sill if it’s an exterior door. This is the step that determines whether the door closes clean for the next twenty years or sags within the first summer.
Stage 4: Insulate, seal, and finish (day 2)
Gaps get low-expansion foam and sealant. Interior casing goes back on. Exterior trim and stucco patching happen here, and stucco patch needs a cure window before paint, so an exterior entry runs two to three days total. You pick trim profile and hardware finish at this point.
Stage 5: Adjust and walkthrough (final day, 45 – 60 minutes)
We adjust the strike plate, confirm the deadbolt engages, and test the door through a full swing. You get a walkthrough of what was replaced, the hardware operation, and the written workmanship warranty. This is also when we hand back the permit card if one was pulled.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The door itself is one decision. The frame, hardware, and glazing are separate, and each one moves the price.
- Steel entry doors: the most common choice in Enterprise’s newer subdivisions. Strong, holds paint, and handles sun exposure well, but dents on impact and can rust at the bottom edge if water sits. Suits a front entry facing full afternoon sun.
- Fiberglass entry doors: the upgrade pick when you want a wood look without the maintenance. Won’t warp or split in Mojave heat, resists cracking, and the price sits roughly $400 to $1,000 above steel for the same size.
- Solid-core interior doors: heavier, quieter, and hold up better than hollow-core in a household that uses the rooms. Hollow-core is the tract-home default; solid-core adds roughly $150 to $350 per door.
- Frame vs. slab replacement: a slab swap (door only, reusing the existing frame) is the fast, cheaper option at roughly $250 to $700 installed. A full frame-and-door replacement costs more but fixes a warped or out-of-square opening, which is the fix you actually need on a door that’s been sticking for years.
- Hardware and finish: entry sets, deadbolts, and handlesets are a separate line. Finish matters in this climate: powder-coated and PVD finishes hold their color under UV where cheaper plated finishes fade within two or three summers.
What Door Installation Costs in Enterprise, NV

Here’s the honest line-item range for door installation in Enterprise:
| Scope | Typical range |
|---|---|
| Interior door, slab replacement (door only) | $250 – $700 |
| Interior door, full frame and door replacement | $450 – $1,900 |
| Exterior entry door, steel, installed | $1,200 – $3,200 |
| Exterior entry door, fiberglass, installed | $1,800 – $4,500 |
| Stucco repair and exterior trim after replacement | $300 – $900 |
Four things push a job to the high end: original framing that’s out of square or rotted, exterior stucco patching, upgrading to a fiberglass or oversized unit, and pulling a permit for a structural opening change. Interior swaps stay low; exterior entries with damage stay high.
A written estimate includes the door unit, labor, shims, sealant, and basic hardware. It usually excludes custom hardware, glass inserts, and stucco repainting, and we list those separately so there’s no change-order surprise mid-job. Groundwork’s 730-Day Done Right Promise covers the workmanship, and our technicians have up to 12 years of experience on doors and trim. That’s part of our wider Windows & Doors work.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise is Las Vegas’s southwest growth corridor, where construction runs through master-planned subdivisions toward the Sloan and Blue Diamond foothills and the mountains’ edge. That means we’re mostly working on newer stucco-and-tile homes in places like Southern Highlands and Mountain’s Edge, not historical homes with original hardware.
The consequence for door installation: builders here often installed builder-grade steel and hollow-core doors fast, and a decade or two of 105°F summers plus intense sun takes a toll. We regularly see sticking doors in west-facing walls where frame movement has shifted the opening. On the foothill edges, homes back onto open desert, so exterior doors also need to meet fire-resistant and ember-resistant detailing and defensible-space standards. That’s a spec we build to on those lots, and a lot of valley flat-land contractors never touch it.
Permits come into play for structural opening changes or new exterior entries, and Enterprise follows standard Clark County inspection sequencing. If you’re also replacing windows or doors as part of a full Windows & Doors in Enterprise project, we coordinate the trades so framing and stucco get finished in one pass. Some homeowners pair door replacement with a kitchen refresh, and we handle that under Cabinets & Countertops in Enterprise when the scope overlaps. If you’re converting a garage rather than replacing a door, that’s Garage Conversion ADU in Enterprise, a different job. We cover the whole Enterprise area.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Enterprise

Most interior door replacements are finished in a single day. Exterior entry doors typically take two to three days because of flashing, stucco patching, and the cure window before paint. Call (844) 797-4406 to schedule a free estimate and get a timeline for your specific door.
A permit is required when you’re changing the size of a structural opening or adding a new exterior door; a straight swap of the same size generally doesn’t need one. We confirm the requirement for your address before ordering and pull the permit in the scope where it applies. Call (844) 797-4406 to check your situation.
Yes. Most door installations reuse the existing opening, so no plumbing or framing moves at all. Structural work only comes up when the opening is out of square or you want a larger door, and we flag that in the estimate before work starts. Call (844) 797-4406 for an on-site assessment.
Interior replacements run $250 to $1,900 depending on slab vs. full frame; exterior entry doors run $1,200 to $4,500 depending on material and any stucco repair. We give a written line-item quote with no change orders. Call (844) 797-4406 for an exact quote; estimates are free.
Every door we install is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. Manufacturer warranties on the door unit itself are separate and handled through the brand. Call (844) 797-4406 to schedule a free estimate and review the details.
Get a Free Door Installation Estimate in Enterprise
Door installation in Enterprise starts with a free on-site estimate. Call (844) 797-4406 and a live person answers, day or night. On that call we’ll set a visit, measure the opening, and give you a written line-item quote with upfront pricing and no surprises. If the project is part of a broader remodel over $10,000, ask about our $1,000 off and 0% financing for 18 months. No pressure, no pitch; a real number you can plan around.
Written by the team at Groundwork Construction Co. of Enterprise.












