







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Paradise, NV: What the Job Actually Takes
Door Installation in Paradise, NV typically runs $450 to $2,600 per door installed, with most interior doors landing in the $450 – $950 range and entry or heavy exterior doors at $1,200 – $2,600. A single interior door is a half-day job; a whole-house swap of eight to twelve doors takes two to four working days. Call (844) 797-4406 and we’ll set up a free on-site estimate so you’re pricing your actual doors, not a guess.
How We Run a Door Installation in Paradise, Start to Finish

Door work looks simple until a frame is out of square by half an inch, which happens more than people expect in Paradise’s older tract stock. Here’s the real sequence we follow, stage by stage, and what you’ll need to decide at each one.
- Day 1, morning: measure and verify the openings. We pull every door’s rough opening, check plumb and square on the jambs, and note floor transitions and wall thickness. On a 1960s or 1970s Paradise tract home, we often find the original framing has settled or the slab has shifted, so we account for that now instead of during install. You decide door style and swing direction at this stage if you haven’t already.
- Day 1, afternoon: demo and prep. Old doors, casing, and damaged jamb material come out. We shim and square the rough opening, repair drywall or stucco edges if the old frame was set proud, and check the threshold and sill on exterior doors. This is the point where a hidden problem shows up: rotted sill plates on doors facing the afternoon sun, or a header that needs a little sistering. You get a call before we do anything beyond the written scope.
- Day 2: hang and fit. New doors go in, hinges set, reveals checked to a consistent gap, and locks or handles installed. A single door hangs in two to three hours once the opening is prepped; a full exterior entry door with sidelites takes four to five hours because of the frame and flashing work.
- Day 2 – 3: trim, seal, and finish. Casing goes back on, exterior doors get flashed and sealed at the threshold and jambs, and we touch up paint or stain where needed. Interior doors usually finish same day; exterior doors get a full sealant pass that has to cure before final inspection.
- Final walkthrough. We open and close every door, check the latch catches cleanly, confirm the weather seal on exteriors, and hand you the paperwork. Interior swaps are done; exterior and any structural openings with a permit get scheduled for inspection.
Across the whole job, the decision points land in a predictable order: door style and material on day one, hardware and finish on day two, paint or stain touch-up decisions at the walkthrough. Get those settled early and the install runs clean. This is also where homeowners often pair the work with Cabinets & Countertops in Paradise if a kitchen or mudroom is getting a refresh at the same time, since the trim crew is already on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Door Installation
Door material and grade drive both the price and how long the door holds up in Paradise’s heat. Here’s the honest breakdown of what you’re picking between.
- Hollow-core interior doors. The budget standard, roughly $150 – $350 per door before install. Light, fine for closets and bedrooms, but they dent and don’t hold up to a house full of kids or pets. Good fit for rental units and quick refreshes.
- Solid-core interior doors. $300 – $650 per door. Heavier, quieter, and they take a stain or paint far better. This is what most Paradise homeowners choose for bedrooms and bathrooms when they want the door to feel substantial.
- Primed or prefinished MDF and wood. MDF holds paint cleanly and resists the dry-air cracking you see in cheaper wood doors; solid wood offers a richer finish but needs more attention to humidity swings. In our climate, primed MDF is the practical choice for interiors.
- Fiberglass exterior doors. $800 – $1,800 installed. The right call for a Paradise entry facing west into the summer sun; fiberglass doesn’t warp or split the way wood does and holds finish longer. Brands like Andersen and Pella build solid fiberglass entry lines, and we carry their catalogs in our material portfolio.
- Steel exterior doors. $700 – $1,500 installed. Secure and affordable, common on side entries and garages, but they dent and can rust at the bottom edge if the threshold seal fails.
- Wood exterior doors. $1,200 – $2,600 installed. Beautiful and period-appropriate on older Paradise homes, but they need refinishing every few years under this sun. Worth it if curb appeal is the priority.
- Sliding and barn-style interior doors. $600 – $1,400 per opening. Space-savers for tight hallways and closets, though they offer less sound isolation and need solid blocking in the wall.
What Door Installation Costs in Paradise, NV

Plan on $450 – $950 for a standard interior door installed, $1,200 – $2,600 for an exterior entry door, and $2,000 – $6,500 for a whole-house interior swap of six to ten doors. Those are real numbers for the Paradise market, not ballpark guesses. Here’s what moves a job to the low or high end:
- Door count and access. A single door is one trip; twelve doors means staging material and a longer labor window. Tight hallways or a second-floor landing add time.
- Existing condition. A plumb, square opening installs fast. A settled frame or rotted sill in a mid-century Paradise home can add $200 – $600 in carpentry repair.
- Material grade. Hollow-core vs solid-core, steel vs fiberglass vs wood: the door itself swings the number by hundreds per unit.
- Hardware and finish. Standard knobs are cheap; high-end handlesets, smart locks, and custom stains add $100 – $500 per door.
- Permit scope. A straight interior swap usually needs no permit. Exterior doors that change the opening size or involve structural framing do, and that adds a county permit and inspection step to the timeline.
Every written estimate from us breaks out labor, material, and any repair line item so you see exactly where the dollars go. What’s included: demo, prep, install, trim, sealant, and cleanup. What typically isn’t: major structural repair, painting beyond touch-up, or a new storm door added to the scope. We flag those before work starts so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Paradise Homes Specifically Do to a Door Installation
Paradise is an unincorporated Clark County township, not a city, so door work here runs on county Building Department permits and county inspection schedules, not city ones. That’s a real difference: if your project needs a permit, it’s pulled and inspected through Clark County, and we plan the timeline around their calendar. Much of the residential stock is mid-century to 1990s tract homes and low-rise condos, and those older openings are where we see the most repair work: settled jambs, sun-baked exterior sills, and doors that stick every summer because the frame has absorbed years of 105°F-plus heat. Exterior doors facing the afternoon sun along the resort corridor and surrounding neighborhoods finish faster with fiberglass than wood for exactly that reason. If your door work is part of a full Windows & Doors in Paradise scope, we line up the crews so the door and window installs share one prep pass instead of two. We cover Paradise and the surrounding area, and our Windows & Doors service handles the wider envelope work when a door swap turns into a bigger opening project. On the resort side, tight staging and after-hours work windows are common near the Strip, so scheduling gets planned around casino operations rather than a normal residential day.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in Paradise

A single interior door takes half a day, and a whole-house interior swap of six to ten doors takes two to four working days. Exterior entry doors take four to five hours each plus flashing and sealant cure time, and any permitted door adds a county inspection step that can push the schedule out a few days. Call (844) 797-4406 for a timeline based on your actual door count.
Interior door swaps typically don’t require a permit, but exterior doors that change the opening size or involve structural framing do, and Paradise pulls those through Clark County since it’s unincorporated. We confirm the permit scope in the estimate so you’re not surprised mid-job. Call (844) 797-4406 and we’ll tell you exactly what your project needs.
Yes, in most cases a door swap stays within the existing opening and touches no plumbing or framing. The exception is widening a doorway or adding a new opening in a load-bearing wall, which needs structural review and a permit. We assess that on the first visit.
Expect $1,200 – $2,600 installed for a fiberglass or wood entry door, with steel at the lower end around $700 – $1,500. Material grade, hardware, and any sill repair move the number. Call (844) 797-4406 for an exact quote; estimates are free.
Every door we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the hang, fit, and seal. Manufacturer warranties cover the door and hardware themselves, and we walk you through both at the walkthrough.
Get a Free Door Installation Estimate in Paradise
Call (844) 797-4406 for a free on-site estimate on Door Installation in Paradise. A live person answers around the clock, and we’ll measure your openings, talk through material choices, and hand you a written line-item quote with no surprises. Our technicians are background-checked and arrive in uniform, and every job is covered by the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












