







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Henderson, NV: What It Costs and How Fast We Can Build It
A chain link fence in Henderson, NV typically runs $3,500 to $9,000 for a standard residential yard, and most jobs are done in two to three days once the permit clears. You’re getting galvanized steel posts set in concrete, tensioned mesh, and a top rail that holds up to desert sun instead of sagging after two summers. Call (844) 797-4406 for a free on-site estimate, and we’ll walk the property line with you before anyone quotes a number.
How We Build a Chain Link Fence in Henderson, Start to Finish

Chain link looks simple from the street. The difference between a fence that stays tight for fifteen years and one that leans by year three lives in the prep. Here’s the actual sequence we run, and where you make decisions along the way.
- Day 1, morning: walk and mark. We meet you on site, confirm the property line against your plat or survey, and flag utilities through the 811 call before a shovel touches dirt. You decide the fence height (4, 5, or 6 foot is standard here), the gate placement, and whether you want a walk gate at the side yard, a double drive gate, or both. This takes about an hour.
- Day 1, afternoon: layout and dig. Posts get spaced at 8 or 10 foot intervals, holes dug, and set in concrete. In Henderson summer heat we pour early and keep the concrete damp so it cures instead of flashing off. Roughly four to six hours for an average backyard.
- Day 2: set and frame. Once the concrete has taken a set, terminal posts, corner posts, and gate posts get braced, then top rail and tension bands go on. Gate posts get extra concrete because a sagging gate is almost always a post problem, not a hinge problem.
- Day 2 to 3: mesh, tension, gates. Mesh gets stretched and tied, gates hung and adjusted so they latch with one hand. We walk the line with you, check tension by hand, and clean up the site.
- Wrap-up: inspection and walkthrough. If your permit requires a final inspection, we schedule it and meet the inspector. You get the warranty in writing, and we leave the property clean enough to walk barefoot where we worked.
Most Henderson jobs finish in two to three working days. A long commercial run or a property with a lot of block wall to tie into can stretch to four or five. You’ll know the exact schedule before we start, and if a permit inspection adds a day, that’s built into the estimate, not billed later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Actually Choose Between
Chain link isn’t one product. Here’s what genuinely changes the outcome, and the honest trade-off on each.
- Gauge and coating. An 11.5-gauge mesh is the residential standard and holds up well. A 9-gauge mesh costs more and resists bending from dogs and kids better. Galvanized lasts; vinyl-coated (black or green) costs roughly 15 to 25 percent more and blends into landscaping, but the coating can chip and the reveal underneath will rust slowly in our UV. For most yards, galvanized is the value pick.
- Height. 4 foot reads as a boundary marker, 5 foot is the common residential choice, and 6 foot is the most secure standard height. Anything taller than 6 foot usually needs extra bracing and sometimes a stricter permit review.
- Gates. A walk gate is simple. A drive gate needs a stiffer frame, heavier hinges, and a concrete footing sized to the span. If you want self-closing, add a hydraulic closer and plan for it to be serviced eventually.
- Privacy and security add-ons. Slats threaded through the mesh give real visual screening for a modest upcharge. Barbed wire on top is a different permit conversation entirely and often an HOA fight, so ask before assuming you can add it.
- Top rail and framework. A single top rail is standard. Adding a bottom tension wire keeps the mesh from lifting, which matters if you have dogs.
If your yard also needs a full privacy or block-wall solution on another side, that’s a different scope. Our Fence Installation service covers it, and we can quote both in one visit so you’re comparing apples to apples.
What a Chain Link Fence Costs in Henderson, NV

Residential chain link in Henderson lands between $3,500 and $9,000 for a typical yard, installed with permit and cleanup included. A small front-yard run can come in under $3,500, while a large lot with multiple gates and a long property line will push toward the top of the range. Here’s the straightforward breakdown:
| Item | Typical range |
|---|---|
| Standard residential chain link, installed | $3,500 – $9,000 |
| Vinyl-coated (black or green) upgrade | +15 – 25% over galvanized |
| Slats for privacy screening | +$300 – $900 depending on run length |
| Additional walk or drive gate | +$250 – $1,200 |
What pushes a job to the high end: linear footage first, then the number of gates, then whether we’re tying into existing block wall (Henderson has block wall everywhere, and tying in cleanly takes more time than running a freestanding line). Ground conditions matter too. Expansive desert soils and old tree roots can require deeper footings or a little excavation. Permit and inspection fees are separate, and we pass them through at cost, itemized.
A written estimate from us lists footage, gauge, post spacing, gate type, footing depth, permit, and cleanup. What it does not include: removing an existing fence unless you ask and we price it, or landscaping repair after trenching. If you want old fence removed, say so at the estimate and we’ll line-item it.
See the difference
Before
After
Before
After
Before
AfterWhat Henderson Homes Specifically Do to This Job
Henderson is a city that builds its own way. Permitting and inspections here run separate from Clark County, so a crew used to county-only work will guess at the process and lose days. In Green Valley and Anthem, the 1990s and 2000s stucco-on-frame tract homes mean you’re often replacing a 25-year-old galvanized fence whose posts have rusted at the ground line, not at the rail. Out near Inspirada and the Lake Mead corridor, it’s the opposite: newer builds where the developer’s fence is thin and the homeowner wants something sturdier from day one. Down around Water Street, you’ll find mid-century lots with unusual property layouts and block wall that’s been there since before most of the south side existed, and tying new fence into 60-year-old block is careful work.
Two local realities shape the schedule. First, the UV here is brutal and the summer heat is real. We schedule digging and pouring for early morning, keep concrete covered so it cures through the heat rather than flashing off, and don’t ask a crew to dig in afternoon sun. Second, the rare monsoon bursts leave standing water in some yards, so we set posts deeper where the soil has proven expansive. That’s a Henderson habit, and out-of-town subs don’t have it.
We work the whole city, across 89015, 89002, 89052, and 89009. If you’re comparing this against a bigger backyard project, homeowners often plan fencing right alongside ADU Site Prep & Utilities in Henderson, since property lines and access routes overlap. You can also see the wider scope on our Fence Installation in Henderson page if you need more than one fence type. And since this is a project some folks pair with a gate upgrade on the house side, Door Installation in Henderson is another job we handle if your entry access needs a rework.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Henderson

Most residential chain link fence jobs in Henderson take two to three working days, plus a short wait for the permit if your project requires one. The permit review itself usually adds a few business days before we start. Call (844) 797-4406 and we’ll give you a schedule based on your property.
Often yes, and the rules are set by the city of Henderson rather than Clark County, which trips people up. Height, setback from the property line, and whether you’re on a corner all factor in, and an HOA can layer its own rules on top. We pull the permit and meet the inspector so you’re not the one chasing paperwork.
A standard residential chain link fence in Henderson runs $3,500 to $9,000, and our upfront pricing means the number you see is the number you pay. The only change order you’d ever see is if you add scope after the estimate, like an extra gate or removing an old fence. Call (844) 797-4406 for an exact quote, and the estimate is free.
Yes, and we do it regularly in Henderson, where block wall is on nearly every lot. Tying in cleanly takes more care than a freestanding run, and we check the existing wall for cracking or movement before anchoring to it. We’ll flag it at the estimate if your block needs attention first.
Our work is covered by the 730-Day Done Right Promise. If something we built isn’t right, we come back and make it right; that’s the whole offer. The fence itself also carries the manufacturer’s material warranty, and we hand you both in writing at the final walkthrough.
Get Your Free Chain Link Fence Estimate in Henderson
If you’re ready to price a chain link fence in Henderson, call (844) 797-4406. A live person answers, day or night, and we’ll set a time to walk your property line, confirm the footage and gate placement, and hand you a written line-item estimate with permit fees included. No pressure, no vague number over the phone. That’s the start of every job we take on.
Written by the team at Groundwork Construction Co.












