







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Henderson, NV: What the Job Actually Involves
Cabinets & countertops in Henderson typically run $14,000 – $45,000 for a full tear-out and replacement, and most jobs take two to four weeks from demo to final caulk. The work is exactly what it sounds like: pull the old boxes and tops, prep the walls and plumbing, set new cabinets level and square, template and install the countertop, then reconnect the sink and finish the edges. Call (844) 797-4406 and we’ll walk you through scope and timing on the phone before anyone steps inside your house.
How a Cabinet and Countertop Job Runs, Stage by Stage

People underestimate this job because it looks simple. It isn’t. Here’s the actual sequence, with the decisions you’ll be making and when.
Stage 1: Measure and layout (day 1, about two hours). We measure every wall, check for out-of-square corners, and note where the plumbing and electrical land relative to the new layout. You decide the cabinet box sizes and door style here, because those drive the lead time. Most semi-custom lines run three to five weeks; stock cabinets can be a week.
Stage 2: Demolition and prep (days 2 – 3). Old cabinets and tops come out. We shut off water and power to the sink and appliance circuits, then patch drywall and check the subfloor and wall framing for soft spots. In Henderson’s older Water Street-area homes we sometimes find original metal cabinets bolted to furring strips, which adds half a day. You decide whether to relocate the sink or range now, not later, because moving a drain line changes the schedule and the price.
Stage 3: Cabinet installation (days 4 – 6). Base cabinets get set first, shimmed and screwed to the wall studs, then uppers go in at your chosen height. Crown, light rail, and filler strips close the gaps against walls that are never perfectly straight. You’ll confirm hardware placement and any pull-out or lazy-Susan configuration before we drill.
Stage 4: Countertop template and install (days 7 – 14, depending on material). Stone and quartz get templated after cabinets are set, then fabricated, which is the long pole in the schedule. Laminate and butcher block can go in sooner. The sink and faucet get set and plumbed at this stage.
Stage 5: Finish and punch (days 15 – 20). Caulk lines, toe kick, touch-up, and a walkthrough where you check every door, drawer, and seam with us in the room. Anything on the punch list gets fixed before final payment.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
- Cabinet construction: Plywood boxes hold up better in heat and humidity swings than particleboard, and they cost more. For a Henderson kitchen that sees 110°F summers, we lean plywood. KraftMaid is a line we install regularly and it’s a reasonable middle ground on price and options.
- Door style and finish: Painted MDF doors are the cheapest to buy and the easiest to chip at the corners. Thermofoil resists moisture but can peel in a hot kitchen. Solid wood and wood-veneer doors cost more and can be refinished later.
- Countertop material: Laminate is the budget pick at the low end of our $2,000 – $6,500 countertop range and looks fine for a rental or a flip. Quartz and granite sit at the top of that range but take heat and stains without fuss. Cambria and similar quartz brands hold color well in strong sun through a west-facing window.
- Edge profile and thickness: A standard eased edge keeps cost down; a mitered or built-up edge adds labor but reads as a thicker slab.
- Sink and faucet: Undermount sinks require a solid-surface or stone top. A Grohe pull-down faucet is a common upgrade our customers ask for, and it pairs with almost any top.
What Cabinets & Countertops Cost in Henderson, NV

For a typical Henderson kitchen, cabinets run $4,000 – $13,000 and countertops $2,000 – $6,500, which lands most full jobs between $14,000 and $45,000 once you add demo, plumbing reconnects, and finish work.
What pushes a job toward the top of that range:
- Kitchen size and cabinet count: A 10-foot galley versus a 20-foot wall of cabinets is a $6,000 – $8,000 swing on its own.
- Moving plumbing or electrical: Relocating a sink or adding a circuit for a new range adds real cost and requires a permit and inspection.
- Material grade: Stock cabinets with laminate tops sit near $14,000; semi-custom with quartz can pass $40,000.
- Condition behind the walls: Water damage under an old sink, or framing that’s out of square, adds repair time nobody quoted.
- Layout changes: Removing a wall or adding an island pushes the job into structural and permit territory.
Every written estimate from us is line-itemed: demo, cabinets, tops, labor, permit, and disposal are separate lines. What’s typically not included is appliance cost, and any drywall or flooring repair beyond the immediate work zone.
See the difference
Before
After
Before
After
Before
AfterWhat Henderson Homes Specifically Do to This Job
Henderson is two housing markets stacked on top of each other. Green Valley and Anthem are full of 1990s and 2000s stucco-on-frame tract homes where the original oak cabinets are now 25 to 35 years old and the laminate tops have delaminated at the sink. Meanwhile the original downtown and Water Street pocket has much older homes with cabinet layouts that predate dishwashers and standard 24-inch boxes. We work both, and they need different answers: the Green Valley job is usually a straight swap in the same footprint, while the Water Street job often needs framing and plumbing brought up to current standards before anything new goes in.
Two local realities matter here. First, Henderson runs its own permitting and inspection process separate from Clark County, so a job that moves plumbing or electrical gets its own inspection sequence, and we schedule around that rather than assuming a county timeline. Second, the desert heat and intense sun through a south- or west-facing window will fade a painted finish and stress a laminate seam faster than most homeowners expect, which is why we steer sun-facing kitchens toward quartz and a finish that holds color. If the scope grows into a wider project, that’s a conversation for our Kitchen Remodeling in Henderson team, and homeowners often pair this work with a Garage Conversion ADU in Henderson or a New Detached ADU in Henderson when they’re adding living space at the same time.
Serving Henderson, NV – Our Local Coverage Area
We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Henderson

Most jobs take two to four weeks, with stone countertops adding the longest wait for template and fabrication. Call (844) 797-4406 and we can give you a realistic date range once we’ve measured.
You need a permit when the job moves plumbing, electrical, or any structural element. A straight cabinet and top swap in the same footprint usually doesn’t require one. We pull the permits that apply and pass the inspections before we hand back the kitchen, and we’ll tell you up front which side of that line your job falls on.
Yes, and that’s the most common scenario. Keeping the sink and range in place cuts cost and time significantly. If you want to relocate either, that’s doable too, but it adds a permit and inspection step.
Plan on $14,000 – $45,000 for a full replacement, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 as separate line items. Your exact number depends on size, material grade, and whether anything moves. Call (844) 797-4406 for a free estimate with a written, line-itemed quote.
All of our work is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right, for two full years. Call (844) 797-4406 with any warranty question and a live person answers, day or night.
Get a Free Cabinets & Countertops Estimate in Henderson
Call (844) 797-4406 to schedule a free on-site estimate for cabinets & countertops in Henderson. We’ll measure, talk through materials and layout, and leave you with a written, line-itemed quote and no pressure to sign that day. We cover the whole city, from Henderson proper out through Green Valley and Anthem, and our Kitchen Remodeling team is one call away if the job turns into something larger.
Written by the team at Groundwork Construction Co.












