







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Enterprise, NV: What the Job Actually Involves
A new concrete driveway in Enterprise typically runs $4,500 – $12,000 for installation and $5,000 – $14,000 for a full replacement, with most residential pours finished in three to five working days from demo to drive-on. You’re dealing with excavation, a compacted aggregate base, formwork, rebar or mesh, a single pour, then a cure window that runs about a week before you park on it. Call (844) 797-4406 to schedule a free on-site estimate and we’ll walk the actual numbers for your lot.
Stage by Stage: How a Concrete Pour Comes Together in Enterprise

Concrete work isn’t complicated, but it’s unforgiving. Skip a step and you find out two winters later when a slab cracks down the middle. Here’s the real sequence we follow, and where you’ll be making decisions.
Day 1 – Site walk and layout. We mark the driveway boundaries, check the finished grade against the garage slab, and confirm drainage direction. On Enterprise’s sloped foothill lots, this is where the drainage conversation happens: which way water runs off and where it goes. You decide the width (a standard single is 10 – 12 feet, a double 20 – 24 feet) and whether you’re matching or widening the existing apron.
Day 2 – Demolition and haul-off. Old concrete, asphalt, or gravel base comes out with a skid-steer and breaker. Debris gets hauled the same day. For a 500-square-foot driveway this is usually a full day of tear-out and cleanup. You don’t decide anything here; you just watch your old driveway disappear.
Day 2-3 – Base prep and grading. We excavate to depth, compact the subgrade, and lay 4 – 6 inches of compacted class-2 aggregate base. This is the part nobody sees and everybody underestimates. Base thickness and compaction are the two biggest factors in whether your slab survives Mojave heat cycling. You’ll confirm the base depth you’re paying for.
Day 3-4 – Forms, steel, pour. Forms go up, rebar or welded wire mesh goes in on chairs, and we call for inspection if the jurisdiction requires it. Then the pour, screed, float, and finish. You pick the finish before this day, not during it.
Day 4-5 – Finish, saw-cut, cure. Control joints get saw-cut within 24 hours of the pour, then curing compound or a wet-cure goes on. You’ll wait roughly 7 days before driving on it and 28 days before it reaches full design strength. That cure window is non-negotiable no matter who pours your driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make: Concrete Options and Their Trade-Offs
Concrete isn’t one thing. The spec you choose drives both the price and how the driveway looks and lasts. Here’s what to weigh:
- Standard broom finish, 4-inch slab – the workhorse. Runs at the low end of our $4,500 – $12,000 range, textured for traction, and handles Enterprise’s extreme summers without the heat-buildup issues of darker surfaces. Good for a primary residence on a stable, level lot.
- 5- to 6-inch slab with rebar – the upgrade that matters most on engineered-fill lots. Rebar instead of mesh, plus extra thickness, adds roughly 15 – 25% to the material and labor line but is the difference between a driveway that cracks cosmetic-style and one that fails structurally. We recommend it on sloped or fill-heavy pads.
- Exposed aggregate – the aggregate surface is washed before cure to reveal the stone. Adds $$ and gives you a non-slip, UV-resistant surface that hides dust well in desert conditions. A local favorite.
- Bordered or colored concrete – integral color and stamped borders are a sideways answer to a paver look without the paver price. If you’re weighing that, our Driveway & Pavers service covers the comparison honestly.
- Control joints and expansion joints – not a “choice” exactly, but a spec. Joints placed every 8 – 12 feet in each direction, plus isolation joints where the slab meets the garage or a fixed structure. Ask for the joint layout in writing.
Finish and slab thickness decisions get locked in at the estimate, not on pour day. Our technicians have up to 12 years of experience reading these choices against real lots, and they’ll push back on a spec that won’t hold up.
What Concrete Driveways & Concrete Work Costs in Enterprise, NV

Real numbers: a concrete driveway installation in Enterprise runs $4,500 – $12,000, and a full replacement of an existing driveway lands at $5,000 – $14,000. Those are all-in figures covering demo, base, forms, steel, pour, and finish. Sealing, if you add it later, is a separate small line.
What pushes a job toward the top of those ranges:
- Size. A 300-square-foot single-width driveway sits near the low end; a 900-square-foot double with a turnaround or an RV pad pushes toward $12,000 and beyond.
- Existing condition. A clean gravel base is cheap to prep. A cracked, heaved, or root-broken slab means more tear-out, more haul-off, and more base repair.
- Grade and drainage. Enterprise lots on the foothill edges are graded pads, often with slope and retaining walls. Adding drainage, re-grading, or building up a subgrade to keep water away from the foundation is real cost.
- Slab spec. Rebar, thicker slab, exposed aggregate, or integral color each add to the line item. The materials are the variable, the labor is fairly steady.
- Access and permitting. A tight side yard that needs a conveyor or a pump truck costs more than an open front lot. If a permit and inspection are required, that’s part of the estimate, not a surprise.
A written estimate from us itemizes base depth, slab thickness, reinforcement, finish, joint layout, and disposal. It does not itemize “miscellaneous” – because there isn’t one. No-hassle upfront pricing means the number you see is the number you pay. Get a free on-site estimate and we’ll put the whole thing in writing.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Homes Specifically Do to This Job
Enterprise isn’t flat central-valley infill. It’s Las Vegas’s southwest growth corridor, spreading out toward the Sloan and Blue Diamond foothills, and that changes how concrete gets poured here. Lots on the foothill edges sit on engineered fill and graded pads, often with retaining walls, so subgrade prep and drainage planning matter more than they would on an old flat lot. We build on soil that moves, and the slab has to be detailed to tolerate it.
Most of the housing stock here is 1990s-to-present stucco-and-tile suburban homes in master-planned communities like Southern Highlands and Mountain’s Edge. That means the concrete we’re replacing is often original builder-grade flatwork that’s now 20 to 30 years old and showing its age – hairline cracking, settling at the apron, sun-bleached broom texture. And because many subdivisions back onto open desert, whether the HOA or the fire-defensible-space rules touch your frontage varies block by block. We’ll tell you what we see in your specific community before anyone touches a shovel.
Extreme summer heat above 105°F also sets the schedule: pours get scheduled early in the day, and curing gets watched closely. If concrete work is part of a larger front-of-house project, homeowners often pair this with Door Installation in Enterprise or a backyard addition through ADU Site Prep & Utilities in Enterprise. For the wider scope, see our Driveway & Pavers in Enterprise page, and if you’re outside the core neighborhoods, our Enterprise service-area page covers the communities we reach.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Enterprise

Most concrete driveways in Enterprise are finished in 3 to 5 working days, from demo and base prep through pour and saw-cut joints. You can drive on it about 7 days after the pour, and the slab reaches full strength at 28 days. Call (844) 797-4406 to lock in a start date for your project.
It depends on the scope and jurisdiction – a like-for-like replacement often doesn’t, while new construction, widening, or grading changes may require review. We’ll confirm for your address and pull whatever is required, so nothing gets flagged later. Call (844) 797-4406 and we’ll tell you what your specific project needs.
No. With our no-hassle upfront pricing, the itemized number you approve is the number you pay. If we hit something the site walk couldn’t reveal – buried debris, an unexpected utility, a failed subgrade – we stop, show you, and re-quote before proceeding. Never an invoice surprise. Call (844) 797-4406 for an estimate that stays put.
Expect $4,500 – $12,000 for a concrete driveway installation and $5,000 – $14,000 for a full replacement, with grade, size, and slab spec pushing the job to the high or low end. Call (844) 797-4406 and we’ll price your lot exactly – estimates are free.
Every project is covered by our 730-Day Done Right Promise – one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right. Our technicians have up to 12 years of experience and are background-checked, and calls are answered by a live person 24/7. Call (844) 797-4406 with any warranty question.
Get a Free Concrete Driveways & Concrete Work Estimate in Enterprise
Concrete work is a long-horizon decision – you’re choosing a surface you’ll park on and live with for 20 to 30 years. That deserves a real on-site walk, not a phone guess. Call (844) 797-4406 and we’ll schedule a free estimate for concrete driveways & concrete work in Enterprise, measure your lot, talk through slab spec and finish, and hand you a written, itemized quote. A live person answers, day or night.
Written by the team at Groundwork Construction Co. of Enterprise.












