







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Enterprise, NV: What It Costs and How Long It Takes
A chain link fence in Enterprise typically runs $3,500 to $9,000 for a standard residential lot, and most installations are finished in one to three days once materials are on site. That range covers 4-foot to 6-foot galvanized or vinyl-coated chain link with a walk gate, set on posts in concrete along a graded lot line. Call (844) 797-4406 for a free on-site estimate. We’ll measure the run, check slope and soil, and put a fixed written price in front of you before any work is scheduled.
How a Chain Link Fence Goes In, Stage by Stage

Chain link is one of the faster fence builds, but the schedule depends entirely on how much prep the lots in Enterprise demand. Here’s the actual sequence we work through.
Stage 1: Site walk and layout (day 1, about an hour)
We walk the property line with you, confirm where the fence sits relative to your plat and any HOA setback rules, and flag anything underground. In the newer subdivisions off Blue Diamond and the Southern Highlands edges, that often means locating irrigation lines, pool equipment runs, and the gas stub before we set a single post. You decide the fence line and gate placement here; everything downstream depends on it.
Stage 2: Utility locate and permit (day 1 to day 3)
Nevada requires underground utilities to be marked before digging, and on sloped or engineered-fill lots we also confirm the fence line doesn’t cross a retaining wall or drainage swale. If your community requires an architectural review or a permit for a solid-screen chain link with slats, that approval window is the variable that sets the whole schedule. On a straightforward lot we’re often digging within a couple of days.
Stage 3: Post setting (day 1 of construction, 3 to 5 hours)
Terminal posts, corner posts, and gate posts get set in concrete first because they carry the tension of the whole run. Line posts follow at 8- to 10-foot spacing. On the graded pads common in Enterprise, we adjust post depth and concrete volume so the fence stays plumb over a slope rather than following every hump in the ground. Concrete needs to cure before tensioning, so this is where the job naturally pauses.
Stage 4: Framework and mesh (day 2, 3 to 4 hours)
Top rail, tension bands, and the chain link fabric go up after cure. We tension the mesh by hand and check every section for sag. This is also when the gate gets hung and adjusted. You’ll want to walk the gate yourself at this point and tell us if the swing or latch isn’t where you want it.
Stage 5: Final walkthrough and cleanup (day 2 or 3)
We tension-check the full run, confirm gates latch cleanly, clear concrete splash and offcut wire, and walk it with you line by line. Anything that doesn’t meet your eye gets corrected on the spot. Groundwork Construction Co. backs the installation with our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between on a Chain Link Fence
Chain link is simple on paper, but the specs you pick change both the price and how it looks five years from now.
- Height (4 ft vs. 6 ft): 4-foot is the common residential default and the cheapest per linear foot; 6-foot adds privacy and security but raises material cost and may trip HOA height rules in some Enterprise communities. Check the covenant before you commit.
- Gauge and coating: Standard 11.5-gauge galvanized wire is the everyday choice; a heavier 9-gauge core is worth the upcharge on long runs or where kids and dogs hit the fence hard. Vinyl-coated chain link (green or black) looks softer against stucco and resists the desert UV that dulls bare galvanized over time.
- Top rail and framework: A tension-wire top is cheaper but sags; a full 1-5/8-inch top rail is the sturdier, longer-lived choice on a sloped lot.
- Posts: Standard steel posts in concrete are fine for most yards. Where the run crosses a graded bank, heavier terminal posts and deeper footings keep it from leaning.
- Gates: A single walk gate is standard; a double drive gate adds cost and hardware. Match the gate hardware to the rest so it opens smoothly for years.
- Privacy slats: If you want chain link with a screen, slats add cost but block sightlines – often a shared decision with an HOA review.
We only stock partners we trust – the same discipline we apply across our work with brands like GAF and Owens Corning on other trades carries into the fencing materials we specify.
What a Chain Link Fence Costs in Enterprise, NV

Plan on $3,500 to $9,000 for a residential chain link fence in Enterprise, with most standard-lot jobs landing mid-range. A few variables push a job toward either end:
- Linear footage: the single biggest lever. A small backyard run sits near the low end; a full-perimeter fence on a larger lot climbs toward $9,000.
- Terrain and slope: graded and engineered-fill lots near the foothills take more post depth, more concrete, and more labor to keep the fence plumb – this is where slope adds real money.
- Material grade: 11.5-gauge galvanized is the baseline; heavier gauge, vinyl coating, and full top rail add cost but last longer in the desert sun.
- Gates and hardware: one walk gate is included in the range; double gates or extra gates add.
- Permit and HOA review: if your community requires architectural approval or a solid-screen slat permit, that scope adds time and a fee.
Every written estimate from us is line-item and fixed – the number you see is the number you pay, no change orders once work starts. If this run is part of a larger exterior project, we can fold it into Fence Installation in Enterprise so you’re pricing the whole job together.
See the difference
Before
After
Before
After
Before
AfterWhat Enterprise Lots Specifically Do to a Chain Link Fence
Enterprise is the southwest growth corridor of the valley, and that changes the job in ways a flat central-valley yard never sees. Much of the housing stock is 1990s-to-present stucco-and-tile suburban homes – Southern Highlands tract homes, Mountain’s Edge subdivisions, and custom builds climbing toward the Sloan and Blue Diamond foothills. Those foothill-edge lots often sit on engineered fill and graded pads with retaining walls, so fence layout has to work with slope and drainage rather than fighting it. Where a subdivision backs onto open desert, defensible-space and ember-resistant detailing influence what you’ll install and how. And the Mojave climate matters: summer highs routinely top 105°F, so scheduling and UV-resistant coatings keep the fence looking sharp longer. If your project extends to grading and utility runs, homeowners often pair this with ADU Site Prep & Utilities in Enterprise. We’re proud to cover the whole of Enterprise, from Southern Highlands to the edge of the foothills.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chain Link Fence in Enterprise

Most residential chain link fence in Enterprise is finished in one to three days once materials are on site, with the concrete post cure being the natural pause. Larger lots or jobs needing HOA or permit approval before digging run longer. Call (844) 797-4406 and we’ll give you a realistic schedule for your specific lot.
Permit requirements depend on your community and HOA – many subdivisions in the Enterprise area require architectural review, and solid-screen chain link with slats sometimes needs a permit. We’ll confirm what applies to your property before any work is scheduled. Call for a free estimate and we’ll walk you through it.
Expect $3,500 to $9,000 for a residential chain link fence in Enterprise, with slope, footage, gauge, and gates moving the number. Heavier gauge and vinyl coating sit toward the high end. Call (844) 797-4406 for an exact line-item quote – estimates are free.
No. The written estimate is fixed; the number you see is the number you pay, with no change orders for the scope we quoted. If something genuinely unforeseen turns up during site prep, we tell you in writing before touching it. Call (844) 797-4406 to book your estimate.
Our installations are covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, one of the longer workmanship guarantees in residential construction. Technicians are background-checked and arrive in uniform. Call (844) 797-4406 to get started.
Get Your Chain Link Fence Estimate in Enterprise
Chain link is a straightforward job, but the price depends on your lot, your slope, and the specs you choose – so the fastest way to a real number is a free on-site estimate. Call (844) 797-4406 and a live person answers any hour; we’ll confirm your fence line, flag any HOA or permit requirements, and hand you a fixed written quote. Planning more exterior work? Explore our broader Fence Installation service, or pair a new fence with Door Installation in Enterprise. Calling is free, and so is the estimate.
Written by the team at Groundwork Construction Co.












