







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Paradise, NV: What It Costs and How Fast It Goes In
A chain link fence in Paradise, NV typically runs $3,500 – $9,000 for a residential lot, with most standard backyards landing between $4,200 and $6,800. A straightforward 150-foot run with a single walk gate can be marked, set, and stretched in two to three working days. Call (844) 797-4406 and we’ll walk your property, measure the actual run, and hand you a written line-item number before anyone touches a shovel.
How we build a chain link fence in Paradise, start to finish

Chain link is the least forgiving fence there is. The posts are the skeleton, and once concrete sets, a post that’s two inches out of line stays two inches out of line. That’s why the front half of this job is layout and the back half is tension. Here’s how the days actually break down.
Day 1, morning: walk, mark, and call for locates
We meet you on site with the plot plan or a copy of your recorded survey if you have one, walk the property line, and paint the run. This is where you decide gate placement and swing direction, and where we flag anything within a few feet of the line, a pool pump, a hose bib, or an AC condenser that shouldn’t get a post next to it. Before any digging, we place the 811 locate request and wait for the utility responses. That waiting period is built into the schedule, not squeezed around it.
Day 1, afternoon: demo and hole layout
If there’s old fencing or bent posts, this is when they come out, loaded, and hauled. Holes get spaced on 8-foot or 10-foot centers depending on line height and wind exposure. On a corner lot or a tight side yard, spacing tightens at terminals and corners because those posts take the pull. You’ll see stakes or paint marks along the run by the end of the day, and that’s your last easy chance to move a gate.
Day 2: dig, set, and cure
Holes go down below frost depth and wider at the base than the top so the concrete bells out and resists pull. Posts get plumbed, braced, and set in concrete. Terminal posts, end posts, corner posts, and gate posts get larger-diameter pipe and bigger footings than line posts; that’s not upselling, it’s how the fence stays tight after a monsoon gust. Concrete needs to cure before you hang anything heavy, so this is a natural stopping point.
Day 3: rails, mesh, tension, and gates
Top rail goes in, then the mesh is unrolled and stretched with a come-along and a tension bar at the terminal. We set the fabric so it doesn’t skin the ground, which matters because desert soil heaves and settles. Gates get hung, checked for swing and latch, and we walk the finished run with you. You approve it before we pack up.
After the build: cleanup and your walkthrough
Excess concrete, wire ends, and packaging leave with us. You get the finished fence, a gate that latches clean, and the written workmanship coverage that backs it. Most Paradise jobs are done inside a week from the first walk, and the schedule only stretches when locates run long or a gate needs a custom build.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The chain link options worth deciding between
Chain link looks like one product from the street. It isn’t. These are the choices that actually change what you get and what you pay.
- Galvanized vs. vinyl-coated mesh. Standard galvanized is the cheapest way to get a secure boundary and it holds up in dry desert air. Vinyl-coated (green or black) costs roughly 15 – 25% more and cuts glare and visibility from the street; it also tends to read as less industrial next to a stucco house.
- Line height. 4-foot keeps pets in and defines a line. 5-foot is the residential default. 6-foot is what most people choose for real security, and the posts and footings step up with it.
- Gauge of wire. Thicker wire resists bending and cutting. On a security-focused run along a side yard or alley, the heavier gauge is worth the spend; on a back property line nobody sees, it’s money you don’t need to part with.
- Post and rail weight. Lighter pipe is fine for a short straight run. If you have long spans, corners, or a driveway gate, the heavier schedule pipe is what keeps the mesh from sagging in year three.
- Gates. A single walk gate is simple. A double drive gate, a self-closing latch, or a gate that matches a set of Door Installation in Paradise hardware choices out back is a different order of build and a different line on the estimate.
- Toppers and privacy slats. Barbed or angled top arms add security on commercial and storage runs. Privacy slats add height and screening but cut wind flow, so the posts have to be sized for it.
What a chain link fence costs in Paradise, NV

Plan on $3,500 – $9,000 for a residential chain link fence in Paradise. The low end is a modest straight run on flat ground with a walk gate. The high end is a full perimeter with corners, a drive gate, heavier gauge, and coated mesh. Every estimate we write is line-item: footage, post count, gate count, concrete, haul-off. The number you see is the number you pay.
Five things move that number:
- Total linear feet. Obvious, but it’s the biggest lever. A 100-foot run and a 300-foot run aren’t the same job at any price per foot.
- Corners, terminals, and gates. Every corner and gate post takes a bigger footing and heavier pipe. A lot with four corners and two gates costs more than a straight pull.
- Ground conditions. Caliche and hard-packed desert soil slow the dig and can require different equipment. Rocky ground adds labor, not material.
- Demo and haul-off. Removing an existing fence, old concrete footings, or a tangle of roots is real work and gets its own line.
- Grade and finish. Galvanized at 4-foot on flat ground is the floor. Heavy-gauge 6-foot coated mesh on a graded lot is the ceiling.
What’s included: layout, locates coordination, demo, footings, posts, rails, mesh, gates, tension, cleanup. What usually isn’t: permit fees when a permit is required, custom gate fabrication beyond standard sizes, and any repair to irrigation or landscaping the old fence was hiding.
See the difference
Before
After
Before
After
Before
AfterWhy Paradise is a different job than the rest of the valley
Paradise isn’t a city. It’s an unincorporated Clark County township, which means your fence permits and inspections come from the county Building Department, not a municipal office, and the review calendar is county-paced. That matters if your fence runs near a pool or a property line with a shared wall. A large share of the housing here is mid-century to 1990s tract homes and low-rise condo complexes, and the fences on those lots are usually the originals, so we spend a lot of time pulling out rusted posts and cracked footings before we set new ones.
The heat does its own work. Posts set in July are set in 105°F-plus afternoons, so we pour early and brace for the sun, and monsoon gusts in late summer are the real test of whether a corner post was footed deep enough. On a condo or apartment complex, the county permitting and shared-line reality means we coordinate with a property manager before a single stake goes in. We cover Paradise and the surrounding neighborhoods, and the same county permit rules follow us across the line into Winchester and Spring Valley.
Serving Paradise, NV – Our Local Coverage Area
We serve Paradise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Chain Link Fence in Paradise

Most residential runs take two to three working days once the utility locates come back. The locates themselves can add a few days to the front end, so from your first call to finished fence, plan on roughly a week. Call (844) 797-4406 and we’ll give you a real date on the walk, not a guess.
Often yes, because Paradise is unincorporated and Clark County handles the permit. Height, setbacks, and pool safety rules all factor in, and a fence around a pool usually carries extra requirements. We check the county rules for your specific lot before we build and fold permit scope into your written estimate. Call (844) 797-4406 with your address and we’ll sort out what applies.
Yes, in most cases. We place the 811 locate first and route posts around utility lines rather than through them, and a fence run rarely needs plumbing or electrical moved. If your line crosses a buried service, we adjust the post layout. It’s the same habit we bring to ADU Site Prep & Utilities in Paradise, where knowing what’s underground is half the job.
A standard backyard lands between $4,200 and $6,800, inside the broader $3,500 – $9,000 range. Corners, drive gates, heavier gauge, and coated mesh push toward the top. Call (844) 797-4406 for an exact quote, estimates are free.
Every chain link fence we install is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right, and that’s in writing. Call (844) 797-4406 to schedule your free estimate.
Get a written chain link fence estimate in Paradise
Tell us the address and roughly how many feet of fence you need, and we’ll set a free on-site estimate. We’ll mark the run, check what’s underground, confirm what the county will require, and hand you a line-item written quote before you commit to anything. Calls are answered by a live person, 24/7, so there’s no voicemail to wait on. Call (844) 797-4406 to schedule your free estimate.
Written by the team at Groundwork Construction Co.












