







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Whitney, NV: What It Takes and What It Costs
Concrete driveways and concrete work in Whitney, NV typically run $4,500 – $12,000 for a new driveway pour, and most residential driveways are finished in three to five working days once the weather cooperates. That number covers excavation, form work, and a standard broom or exposed-aggregate finish on an average lot. A replacement, where the old slab has to come out first, lands in the $5,000 – $14,000 range. Call (844) 797-4406 and we’ll walk your drive and put real numbers on paper.
The Build Process, Start to Finish

Concrete work has a short list of stages but each one matters, and skipping any of them is why slabs crack two summers later. Here’s how a Whitney job actually goes.
Stage 1: Site walk and layout (day 1)
We walk the drive with you, check slope and drainage direction, and mark the layout with paint. This is where you confirm width, turn radius, and where the expansion joints will land. On acreage lots, we’re also sighting the service drive extension and making sure water sheds away from the shop slab, not toward it. You’ll have a written line-item quote before anybody lifts a shovel.
Stage 2: Demo and excavation (day 1 – 2)
Existing concrete comes out with a breaker and gets hauled off. We excavate to depth, which for a residential drive here means roughly 6 inches of base plus 4 inches of slab, deeper where a heavy truck or a loaded trailer parks. Subgrade gets compacted in lifts, and you’ll see us checking grade with a laser before anything else moves forward. On longer rural drives, this stage takes the bulk of the time.
Stage 3: Forms, base, and rebar (day 2 – 3)
Forms go up to the layout, base gravel gets compacted and watered, and rebar or mesh gets tied in on chairs so it stays in the slab rather than sinking to the bottom. If you’re pouring a pad for a detached workshop, this is where the thickened edge goes in. You’ll decide whether you want a control-joint layout that divides the slab evenly or one that works around a future gate or shop door.
Stage 4: The pour and finish (day 3)
Concrete arrives early, gets placed, screeded, and floated, then finished to the texture you picked. Summer in Whitney is the hard part: we usually pour at dawn and use evaporation retarder or a windscreen, because desert heat and low humidity will flash a slab before you can finish it. That’s not a sales line, it’s why an August pour can fail while the same mix works in April.
Stage 5: Cure, saw cuts, and walkthrough (day 3 – 7)
Control joints get saw-cut within the curing window, then the slab cures under water or a curing compound to hold moisture. You can generally walk on it within 24 to 48 hours and drive on it in about seven days, longer for full design strength. We do a final walkthrough with you, and the whole job sits under our 730-Day Done Right Promise. If something isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Concrete isn’t one product. Here’s what actually changes the look and the durability, with the honest trade-offs:
- Standard broom finish – the workhorse. Good traction, hides tire marks, and costs the least. It looks plain, which is fine on a service drive and less so on a front approach.
- Exposed aggregate – seeded stone surface with a textured, grippy feel that holds up to intense sun. It’s a step up in price and rougher underfoot, so it’s a bad pick for a driveway you push a wheelchair or a handcart across often.
- Color hardener or integral color – tinted concrete that doesn’t chip off like a coating. Warm earth tones suit Whitney’s desert palette. Fades slowly over years; costs more than plain gray.
- Fiber mesh versus rebar – fiber controls hairline cracks, rebar carries load across a joint. On a drive that takes a heavy truck or a trailer, we spec rebar, not fiber alone.
- Slab thickness – 4 inches for cars, 5 to 6 inches for an RV, trailer, or heavy equipment pad. Thicker costs more per square foot but is the difference between a slab that lasts and one that cracks at the edge.
- Thickened edge and integrally cast pad – the workshop slab detail that lets a heavy door and a loaded workbench sit without a separate footing pour. Worth it if the pad is going under a steel building from a maker like Cover or Boxabl.
We use Belgard on the paver side of things and pull from regional concrete suppliers for the mix itself, so you’re choosing on quality and finish, not on what happened to be available that week.
What Concrete Driveways & Concrete Work Costs in Whitney, NV

New concrete driveway installation in Whitney runs $4,500 – $12,000, and a full replacement including demo of the old slab runs $5,000 – $14,000. A detached workshop pad or a large service-drive extension is quoted per square foot and usually lands inside or just above that range depending on thickness.
Five things push a job toward the high end:
- Square footage and thickness – the biggest driver. Doubling the slab depth on an RV pad can add thousands.
- Demo and haul-off – breaking out the old slab and trucking it away is real money on a long rural drive.
- Site access and distance – a drive that runs far from the street means more hauling and a shorter chute reach, so more labor.
- Finish – broom is the base; exposed aggregate or integral color adds cost.
- Drainage and grading – if the yard needs a swale, a French drain, or regrading to move water off the slab, that’s added scope.
Your written estimate lists demo, excavation, base, rebar, the pour, finish, saw cuts, and haul-off as separate lines. What typically isn’t included: landscape repair after excavation, moving irrigation lines, and any structural work if a pad abuts a building. We tell you that up front so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Whitney Homes Specifically Do to This Job
Whitney is unincorporated Clark County, and that one fact shapes how a concrete job gets permitted and inspected here. Permits for structural concrete work go through the Clark County Department of Building & Fire Prevention, and inspections are scheduled through the county, not a city building department. Locals know the timelines and paperwork differ from what happens in neighboring Las Vegas, and a contractor who only works inside city limits will feel that difference immediately. We know the county process and schedule inspections to match it.
The housing stock here is mostly mid-century to late-20th-century single-family homes, a lot of older ranch-style places with gravel or failing concrete drives, plus newer infill. On older properties we regularly see slabs that cracked at the control joints years ago because they were poured thin over un-compacted base. And the climate is unforgiving: intense UV and thermal expansion mean a slab needs the right joint spacing and a cure that respects the heat. Summer pours get scheduled early and cured carefully, or they don’t happen.
If the driveway is part of a larger outdoor plan, it’s often tied in with a full Driveway & Pavers in Whitney scope, and homeowners planning a workshop or back unit often pair this with ADU Site Prep & Utilities in Whitney. For a workshop building we’ll coordinate the slab under it, and that dovetails with Door Installation in Whitney for the oversized shop door once the pad cures. See our broader Driveway & Pavers service and the rest of what we do across Whitney.
Serving Whitney, NV – Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Concrete Driveways & Concrete Work in Whitney

A typical residential concrete driveway in Whitney takes three to five working days from demo to final walkthrough, plus about seven days before you drive on it. Summer heat and county inspection scheduling can stretch that, so we build the inspection window into the timeline up front instead of surprising you later. Call (844) 797-4406 for a schedule you can plan around.
Structural concrete work, like a pad under a building or a driveway tied to a structure, typically requires a permit through the Clark County Department of Building & Fire Prevention because Whitney is unincorporated. We pull the permit and schedule the county inspection as part of the job, so you’re not chasing paperwork. Call (844) 797-4406 and we’ll tell you exactly what your project needs.
Yes, a detached workshop or RV pad can usually be poured without touching the house, plumbing, or structure, as long as site access allows equipment in. We check access, grade, and drainage before we quote it, and we size the slab and thickened edge for what’s going on top, whether that’s a steel shop building or a parked trailer. Estimates are free: (844) 797-4406.
New concrete driveway installation in Whitney runs $4,500 – $12,000, and a full replacement with demo lands at $5,000 – $14,000. Thickness, demo, site access, and finish are what move the number. Call (844) 797-4406 for an exact written quote with no change orders.
Every concrete job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If it’s not done right, we make it right, and you get that in writing. Call (844) 797-4406 to schedule your free on-site estimate.
Get a Free On-Site Estimate
We’ll walk your Whitney drive or pad site with you, check grade and access, and hand you a written line-item estimate that covers demo through cure. Calls are answered by a live person around the clock at (844) 797-4406, and there’s no pressure on the call, just answers and a real number. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












