







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Summerlin, NV: What It Costs and How Long It Takes
Asphalt Driveways & Resurfacing in Summerlin, NV typically runs $3,500 – $9,000 for new paving and $250 – $700 for sealing, with most residential jobs finished in one to three days plus a short cure window. A full replacement with tear-out of the old surface lands around $5,000 – $14,000. Call (844) 797-4406 and we’ll walk your drive, check the base, and hand you a written line-item number before any crew touches the property.
From tear-out to the last roller pass: how we actually build an asphalt drive here

Every stage below is a decision point for you and a checkpoint for us. Here’s the real order of operations, not a brochure version of it.
Stage 1: Site walk and base inspection (day 0)
We measure the drive, probe the sub-base, and look for the caliche shelf that runs under a lot of west-side properties. Caliche is the cement-like calcium-carbonate layer common in desert soil out here, and when it sits close to the surface it changes both the excavation plan and the cost. You decide at this visit whether we’re overlaying sound asphalt or tearing out to the base. That single call moves the price more than anything else on the list.
Stage 2: Excavation and grading (day 1, roughly 4 – 8 hours)
We strip the old surface, cut down to grade, and shape the sub-base so water runs off the slab and away from the garage, not toward it. On Summerlin lots with slopes or tight side yards, we may bring in rock-breaking equipment for caliche and a small loader to haul spoils. You’ll want to move vehicles off the drive the night before and keep the garage empty of anything you need that day.
Stage 3: Base compaction and edge prep (day 1, after excavation)
Crushed aggregate goes down in lifts and gets compacted in passes, not one dump and a single roll. Edges get formed and the transition at the garage apron and street gets set. This is the stage nobody sees and the one that decides whether your asphalt holds up for fifteen years or cracks in three. We don’t skip lifts to save a day.
Stage 4: Hot-mix paving (day 2, 3 – 6 hours depending on square footage)
Hot asphalt arrives by truck and goes down while it’s still workable, then gets rolled to density. In Summerlin’s summer heat, we schedule pours early and keep the mix from sitting. The surface consolidates as it cools; you’ll stay off it for foot traffic for about 24 hours and keep vehicles off for 48 – 72 hours, longer in the shoulder months.
Stage 5: Sealing, striping, and final walk (day 3, or a return visit if the surface needs to cure)
Fresh asphalt needs to cure before sealcoat, so on new paving we come back weeks later, not the next morning. If you’re resurfacing an existing drive that’s structurally sound, sealcoat can go on the same visit. You’ll get a final walkthrough, care instructions, and the written workmanship terms that back the job for 730 days under our Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll weigh before we start
- Full replacement vs. overlay/resurfacing. A resurface caps the existing asphalt with a new wearing course and costs less, but it only works if the base is sound and the cracking is surface-level. If you’ve got alligator cracking or settling, the overlay hides the problem for a season or two. We’ll tell you which one your drive actually needs.
- Hot-mix grade. Standard residential mix is fine for a typical single-family drive; heavier mixes and thicker lifts make sense on steep approaches or where a heavy truck or RV parks routinely. The upgrade is a modest line item and buys real durability.
- Base thickness. A 4-inch base handles passenger cars. Going to 6 inches costs more upfront and is the difference between a drive that bridges minor settlement and one that doesn’t. Worth it on clay-heavy or previously-failed subgrades.
- Sealcoat timing and type. A quality asphalt-based sealcoat with sand for traction runs $250 – $700 depending on square footage. Skip the cheap watered-down product; it looks good for one season.
- Edge restraint. Concrete or Belgard border restraints hold the asphalt edge and keep it from raveling, especially where the drive meets landscaping. A clean, finished edge also reads better from the street.
- Drainage and grading. A crowned surface, a shallow swale, or a channel drain at the low corner all push water off the slab. On Summerlin lots with slope runoff, this is the spec you don’t want to cut corners on.
What Asphalt Driveways & Resurfacing costs in Summerlin, NV

Asphalt Driveway Paving in Summerlin lands at $3,500 – $9,000 for most single-family drives, and a Driveway Replacement that includes tear-out runs $5,000 – $14,000. Sealing is $250 – $700. Those are the market numbers we work from; here’s what pushes a job toward the low or high end.
| Line item | Typical range in Summerlin |
|---|---|
| New asphalt paving (single-family drive) | $3,500 – $9,000 |
| Full driveway replacement (tear-out + new) | $5,000 – $14,000 |
| Sealcoat and crack fill | $250 – $700 |
| Base work and caliche excavation | Quoted after site walk |
Five things move the number. Square footage is the first and biggest. Existing condition comes second: a sound surface that just needs an overlay is a fraction of a full tear-out. Caliche or rock in the subgrade adds excavation time and equipment. Access matters too, since a drive hemmed in by a wall and a narrow side yard slows hauling. And material spec – base thickness, mix grade, edge restraint – is the last dial you control.
A written estimate from us includes tear-out, base prep and compaction, the asphalt itself, edge work, and cleanup. It does not include landscaping repair along the edges, moving a fence or gate, or any drainage structures added later. Those get priced separately and listed up front, so the number you sign is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Summerlin homes specifically do to this job
Summerlin is a master-planned community on the western edge of the Las Vegas Valley against the Spring Mountains and Red Rock Canyon, and that fact sits on top of every asphalt project here. You can’t just pull a Clark County permit and pour; the community associations and Summerlin design guidelines shape everything from lot coverage to what materials and walls are allowed. Before we mobilize, we confirm the scope against HOA architectural review, and on jobs where drainage or grading changes, we make sure the plan clears the trails and viewshed restrictions the design guidelines protect. Caliche is the other local constant: it routinely stops trenching and excavation out here, and we budget for rock-breaking equipment that a contractor from a softer-soil market wouldn’t expect. Add the desert’s brutal summer heat and monsoon-season flash-flood risk, and drainage isn’t negotiable. Our crews schedule early-morning paving in the hot months, and we grade every drive to move sudden heavy runoff off the slopes. Most of the homes we work on are 1990s-and-newer stucco-on-slab builds, and the drive failures we see most are edge raveling, alligator cracking from a thin base, and water pooling at the low corner where the grade was never corrected. If the driveway is part of a larger Driveway & Pavers in Summerlin project, we’ll coordinate the whole scope, and homeowners often pair this with Chain Link Fence in Summerlin or ADU Site Prep & Utilities in Summerlin when a backyard build is in the works. Our Driveway & Pavers service covers every surface, and you can see the wider Summerlin coverage we run.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Asphalt Driveways & Resurfacing in Summerlin

Most residential asphalt jobs take one to three days on site, plus a cure period before you drive on it. A simple overlay is often a single long day; a full replacement with excavation and base work runs two to three days, and new asphalt needs about 48-72 hours before vehicle traffic. Call (844) 797-4406 for a schedule that fits your drive.
You’ll likely need HOA architectural review, and grading or drainage changes may trigger a Clark County permit. Summerlin’s community associations and design guidelines govern more than a standard county permit covers, so we check the scope against your association’s rules before we start. Call (844) 797-4406 and we’ll walk you through what your project needs.
Yes, when the existing base is sound and the damage is surface-level. An overlay caps the old asphalt with a new wearing course and costs significantly less than a full replacement. If there’s alligator cracking or settling, though, an overlay just hides the problem and we’ll tell you so. Call (844) 797-4406 to get an honest read on your drive.
Resurfacing typically lands at the lower end of the paving range, with full replacement at $5,000 – $14,000 and sealcoat at $250 – $700. Square footage, base condition, caliche excavation, and edge work are what move the number. Call (844) 797-4406 for an exact quote; estimates are free and we put it in writing.
Every project we complete is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Call (844) 797-4406 to talk through the terms before you commit.
Get a free estimate on your asphalt driveway in Summerlin
We’ll come out, measure the drive, probe the base, and check the grade against your lot’s drainage. You’ll get a written line-item estimate, honest advice on overlay versus replacement, and no pressure to sign anything on the spot. Call (844) 797-4406 to schedule your free on-site estimate for Asphalt Driveways & Resurfacing in Summerlin.
Written by the team at Groundwork Construction Co.












