







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Summerlin, NV: What the Job Actually Involves
Door installation in Summerlin, NV typically runs $650 to $2,400 per exterior door installed, and $350 to $1,100 per interior door, depending on the slab material, frame condition, and hardware. A straightforward single-door swap is usually a one-day job; a full entry system with sidelites, a new frame, and a smart lock usually takes two to three days. Call (844) 797-4406 and we’ll walk your Summerlin address, talk through the door type, and give you a written number before anyone touches a hinge.
How a Groundwork Door Installation Runs, Stage by Stage

We don’t hand you a vague “we handle everything” and disappear. Here’s the actual sequence, with the decisions you own at each point.
Stage 1 – Measure and confirm (day 1, about 60 – 90 minutes)
We measure the rough opening, check the existing frame for rot or settling, and confirm the swing and handing. You decide the door material and whether we’re keeping the existing frame or replacing it. On a Summerlin stucco wall, the frame condition matters more than most homeowners expect, because a failing frame means the repair scope changes.
Stage 2 – Order and lead time (typically 2 – 5 weeks)
Custom and premium doors take longer than stock. A carriage-house style wood door or a Marvin or Andersen unit ordered to spec usually lands in three to five weeks. You’ll get the confirmed delivery window in writing so your schedule isn’t a guess.
Stage 3 – Demo and prep (day 1 of install, 2 – 4 hours per door)
We pull the old slab and, if needed, the frame. On stucco exteriors we cut back cleanly, check for water intrusion behind the frame, and repair any soft wood or damaged sheathing before the new unit goes in. This is the stage where a cheap job gets exposed: skipping the flashing and the sill pan is how you get a leak two monsoons later.
Stage 4 – Set, shim, and seal (day 1 – 2, 2 – 3 hours per door)
The door gets set plumb and square, shimmed at the hinge and lock points, and secured. We flash the sill and head, seal the perimeter, and insulate the gap. Hardware and lockset go on last. You decide the hardware finish and whether you’re integrating a smart lock now or later.
Stage 5 – Adjust, finish, and walkthrough (final 1 – 2 hours)
We check the swing, the latch, and the weather seal, then walk you through operation and care. Stucco patching and paint touch-up get scheduled here. You sign off on the work, and it’s covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Worth flagging plainly: exterior door frames on a stucco wall are a structural and weather-barrier component. We handle the cutting, flashing, and sealing with the right sequencing because getting it wrong means water behind the wall. That’s not a place to improvise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Door Installation
The material and configuration choices are where the budget and the look both land. Here’s the honest trade-off on each:
- Wood entry doors (including carriage-house style): The premium look Summerlin’s custom and semi-custom homes tend to favor. Warm, paintable, repairable, and easily the most expensive – expect the top of the range. They need re-finishing every few years under desert UV. Best for a statement front entry where the curb appeal is the point.
- Fiberglass entry doors: The sweet spot for most Summerlin homes. They mimic wood grain, hold up to 105 – 115°F summers without warping, and won’t swell with seasonal moisture swings. Mid-range cost, low maintenance.
- Steel doors: The most durable and secure, and the least expensive of the three for a solid entry. Limited finish options and can dent. Right call for a garage-entry or side door.
- Interior doors (hollow-core vs. solid-core): Hollow-core is lighter and cheaper for closets and low-traffic rooms. Solid-core costs more but kills sound transfer and feels substantial – worth it for bedrooms and home offices.
- Smart and integrated hardware: Keypad deadbolts, app-connected locks, and whisper-quiet closer hardware are increasingly common in Summerlin’s newer and updated homes. Plan the wiring or battery location at the measure stage, not after the door is hung.
We source through a curated set of brand partners, so you’re choosing quality rather than whatever happens to be in stock. When it’s part of a full Windows & Doors in Summerlin project, we coordinate the door schedule so everything lands together.
What Door Installation Costs in Summerlin, NV

Exterior door installation in Summerlin runs $650 – $2,400 per door installed; interior doors run $350 – $1,100 per door. A full entry system with sidelites, new frame, and premium hardware can reach the top of that range and beyond. Here’s what pushes a job to the low versus high end:
- Door material and grade: A stock steel door sits at the bottom; a custom wood carriage-house door with a matched finish sits at the top.
- Frame condition: Keeping a sound existing frame keeps costs down. Replacing a rotted frame adds labor and materials.
- Opening changes: Enlarging or relocating an opening means structural work and stucco repair, which moves the number up significantly.
- Hardware and integration: Basic lockset versus smart-lock integration and premium finish hardware.
- Permit scope: A like-for-like swap usually needs no permit; a new opening or structural change does, and that adds inspection steps.
You get upfront pricing with no surprises – a written, line-item estimate that lists what’s included (demo, flashing, sealing, hardware, patching) and what isn’t (paint beyond touch-up, screen doors, specialty trim). Projects over $10,000 get $1,000 off, and 0% financing for 18 months is available. Call (844) 797-4406 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Summerlin Homes Specifically Do to a Door Installation
Summerlin is a master-planned community on the western edge of the Las Vegas Valley, up against the Spring Mountains and Red Rock Canyon. That geography changes this job in ways a general contractor from another market won’t anticipate. For one, HOA architectural review sits on top of Clark County permitting. If your new door changes the style, color, or hardware in a visible way, the community association’s design guidelines can require approval before installation – we plan for that review timeline so it doesn’t stall the job. The 1990s-to-present tract and semi-custom homes here are mostly wood-frame stucco on slab with tile roofs, so we regularly see entry frames on the 20-to-30-year-old segments that have taken decades of intense UV and monsoon-season moisture. UV degrades the finish and dries the seals; monsoon runoff finds any gap in the flashing. In the older phases around The Ridges and Red Rock Country Club, frame rot and failed weather seals are the failure modes we see most. In newer phases pushing west and south, it’s often upgrading builder-grade doors and hardware rather than repair. We cover all of Summerlin and the surrounding valley, and our windows & doors service brings the same discipline to every install.
Serving Summerlin, NV – Our Local Coverage Area
We serve Summerlin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Summerlin

A single door replacement is typically a one-day job; a full entry system with a new frame and sidelites takes two to three days. Custom-ordered doors add a two-to-five-week lead time before install begins. Call (844) 797-4406 and we’ll give you a realistic schedule for your specific door.
A like-for-like door swap usually doesn’t require a permit, but a new opening or a structural change to the wall does, and Summerlin’s HOA architectural review may apply on top of that. We tell you upfront which applies to your job, and we handle the permit and inspection steps when they’re needed. Call for a free assessment.
Yes. A standard replacement uses the existing opening, so there’s no plumbing or structural work at all. Only when you’re enlarging an opening or changing its location does structure come into play, and we’ll flag that cost before we start. Call (844) 797-4406 for an exact quote.
Exterior doors run $650 – $2,400 installed and interior doors $350 – $1,100, with premium materials and frame replacement pushing toward the high end. You get a written line-item estimate before work begins. Estimates are free – call (844) 797-4406.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it’s backed in writing. Call (844) 797-4406 to get started.
Get Your Free Door Installation Estimate in Summerlin
When you call (844) 797-4406, a live person answers – around the clock – and we’ll set a free on-site estimate at your Summerlin home. We measure the opening, talk through material and hardware choices, and hand you a written number with no surprises. If the door is part of a larger project, homeowners often pair this with Cabinets & Countertops in Summerlin or a Garage Conversion ADU in Summerlin. One call, straight answers, backed in writing.
Written by the team at Groundwork Construction Co.












